JVC HR-J674EU instruction manual 14 EN, Setting satellite receivers brand and channel

14 EN SAT CONTROL SET (cont.)

Setting satellite receiver's brand and channel

After installation, set the satellite receiver’s brand and channel correctly; otherwise, the Satellite Controller cannot work correctly.

Turn on the TV and select the video channel (or AV mode).

A Turn on the satellite receiver.

Turn on the satellite receiver’s power.

B Access the Main Menu screen on the recorder.

C Access the Initial Set screen.

Press rt to move the highlight bar (pointer) to “INITIAL SET”, then press OK or e.

D Access the Sat Control Set screen.

Press rt to move the highlight bar (pointer) to “SAT CONTROL SET”, then press OK or e.

E Enter the satellite receiver’s brand.

Press the appropriate NUMBER keys to enter the brand code from the list on page 15, then press OK.

●If the brand code you entered is invalid, the code field will be reset. Enter the correct brand

code again.

● If the recorder is in playback or

recording, you cannot set the brand code.

F Select the satellite receiver’s channel.

Press the appropriate NUMBER keys to enter the channel position on the satellite receiver, then press OK.

●You can select the channel position between 1 to 999.

●After pressing OK, the recorder

enters the Test mode.

Press MENU.