JVC HR-J674EU Select the language, Perform Auto Set Up, Press rt to select your language code

Page 9

EN 9

C Select the language.

Press OK. The Language Set display appears on the front display panel and/or on the TV screen.

On the front display panel

Press rt to select your language code.

Language Code

 

 

 

 

 

ENGLISH

:

01

NORSK

:

08

DEUTSCH

:

02

SUOMI

:

09

FRANCAIS

:

03

DANSK

:

10

ITALIANO

:

04

POLSKI

:

11

CASTELLANO

:

05

CEcTINA

:

12

NEDERLANDS

:

06

MAGYAR

:

13

SVENSKA

:

07

 

 

 

(Example) DEUTSCH is selected for SUISSE.

International telephone

Language code

country code

On the on-screen display

Press rt to move the highlight bar (pointer) to the language of your choice.

D Perform Auto Set Up.

Press OK. The AUTO SET/T-V LINK display appears on the front display panel and/or on the TV screen.

On the front display panel

Press rt to select “Auto” and press OK or e.

On the on-screen display

Press rt to move the highlight bar (pointer) to “AUTO SET” and press OK or

e.

“Auto” blinks on the front display panel; do NOT press any button on the recorder or remote control until the front display panel shows clock time, “(CH) 1” or

–:– as illustrated on page 11.

If you are using the on-screen display, the AUTO SET

screen will appear. As Auto Set Up progresses, the “q“ mark on the TV screen moves from left to right.

BeginningEnd

If you have connected the recorder to your TV via the AV connection ( pg. 7), the recorder will automatically perform Preset Download ( pg. 10).

ATTENTION

Once you have performed Auto Set Up, even if the recorder’s memory backup has expired, all the stored stations and their Guide Program numbers remain in the recorder’s memory and the recorder will not perform Auto Set Up again. You only need to set the clock. ( pg. 48)

If you have moved to a different area, perform each setting as required.

Video channel setting (for RF connection users)  pg. 46

Tuner setting  pg. 40

Clock setting  pg. 48

If a new station starts broadcasting in your area, perform tuner setting ( pg. 40) and, if necessary, video channel setting ( pg. 46).

NOTES:

In the area where no TV station transmits a PDC (Programme Delivery Control) signal, the recorder can perform neither Auto Clock Set nor Auto Guide Program Number Set.

If there is a power cut, or if you press 1 or MENU while Auto Set Up is in progress, Auto Set Up will be interrupted; be sure to turn off the recorder power once and try again from step 1.

Auto Clock Set may not function properly depending on the reception condition.

If no sound accompanies the picture or the audio sounds unnatural on some channels that have been stored by Auto Set Up, the TV system setting for those channels may be incorrect.

Select the appropriate TV system for those channels ( pg. 43, “INFORMATION”).

Image 9
Contents Video Cassette Recorder English Safety Precautions Moisture Condensation Front View Front Display Panel Operating JVC TVs How To UseSituate the recorder Check the contentsConnect the recorder to TV Connect the recorder to mainsAuto Set Up Turn on the recorderSelect your country Select the language Perform Auto Set UpPress rt to select your language code Press rt to select Auto and press OK or e10 EN Perform Preset DownloadSet the video channel Press rt to select CH - and press OK or eJust Clock Language for the on-screen displayAccess the Country Set screen Access the Main Menu screenLanguage 12 ENSituate the Satellite Controller Installing Satellite ControllerAttach the Satellite Controller Make connections14 EN Setting satellite receivers brand and channelTV Auto Power On NexTView LinkVCR Auto Standby Direct Rec 16 EN Basic PlaybackHigh-Speed Search Slow MotionVariable Speed Search Pause during playback18 EN Manual TrackingInstant ReView Skip Search Index SearchNext Function Memory Repeat Playback20 EN Engage the ITR mode Instant Timer Recording ITRWatching Another Set the recording duration22 EN Reset the counterTape Remaining Time Set the counter displayRecording PlaybackAccess the Showview Program screen Access the Showview screenBefore performing the Showview Timer Programming 24 ENEngage the recorder’s timer mode Set the VPS/PDC modeSatellite Receiver Users Guide Program Number Set26 EN Express Timer ProgrammingVPS/PDC Recording To Timer-Record Weekly Or Daily SerialsEnter the channel position Press PR +28 EN Confirm the overlapping programmes Cancel or change programme settingSelect the programme to modify Overlapping programmes blink on the TV screenEngage the Auto Satellite Programme Recording mode Select the L-2 Select modeProgramme Recording 30 ENSet the edit mode Set the recorder’s input modeEdit From a Camcorder Start the camcorderAnother Video Recorder Set the input mode of recording deck32 EN Start the source playerSatellite receiver Decoder Back of recorder Connecting To a Satellite Receiver34 EN Select the input modeConnect the decoder Set the tunerMake connections HR-J670/671/672/673/674EU onlyAccess the Mode Set screen Mode SetSelect the mode Select the mode settingThis feature helps you to adjust the playback picture You can set the B.E.S.T. Biconditional Equalised SignalWhen this function is set to ON, the timer is Off, and automatically disengaged when the recorder isFor Example 38 ENAbout Ntsc Playback Tuner Set Access the Auto Channel Set screen40 EN Auto Channel SetPerform Auto Channel Set View the Confirmation screenPress OK twice Manual Channel Set 42 ENDelete a Channel When Receiving a Scrambled Broadcast44 EN Set Stations aSet Stations B Station Name TV Station And ID ListExit the Video Channel Set mode Access the Video Channel Set modeVideo Channel Set 46 ENGuide Program Number Set Showview SetupGuide Program Number Enter the Guide Program numberAccess the Clock Set screen Clock Set48 EN Set Just Clock Set the date and timeSet the source channel position for clock data Start the clock operation50 EN TroubleshootingRecording 52 EN Other ProblemsPlayback 54 EN Connecting To a Satellite Receiver Delete a Channel Auto Set UpLanguage Manual Channel Set Manual Tracking Mode Set Timer warning display Tuner SetInternational Telephone Language Code Country CodeSee Instructions  pg
Related manuals
Manual 56 pages 18.54 Kb