JVC HR-J777MS, HR-J677MS specifications Automatic Sat- ellite Program Recording, REC Linc indicator

Page 31

EN31

Automatic Sat- ellite Program Recording

 

LINK

REC LINC indicator

REC

 

 

 

7 8 9

4

0

This facility allows you to automatically record a satellite program which is timer-programmed on your external satellite receiver. Connect a satellite receiver to the recorder's rear AUDIO/VIDEO IN connectors and program the timer on the satellite receiver; the recorder starts recording when the signals input from the satellite receiver to the rear AUDIO/VIDEO IN connectors, and when there is no input signals the recorder stops recording and the power shuts off.

Before performing the following steps:

•Program the timer on the satellite receiver.

•Insert a cassette with the safety tab in place.

SET TAPE SPEED

1 Press SP/LP/EP to set the tape speed.

ENGAGE AUTO SATELLITE PROG REC MODE

2 Press and hold REC LINK for about 2 seconds. The REC LINK indicator lights up and the recorder turns off automatically.

●To disengage the Auto Satellite Prog Rec mode, press REC LINK. The REC LINK indicator goes off.

●If the recorder's power is off, it is not possible to engage the Auto Satellite Prog Rec mode.

1

SP/LP/EP

3

NOTES:

ATTENTION

●Be sure not to turn on the satellite receiver before the program is executed; otherwise, the recorder will start recording when the satellite receiver's power is turned on.

●If you have connected another appliance other than a satellite receiver to the rear AUDIO/VIDEO IN connectors, be sure not to engage the Auto Satellite Prog Rec mode; otherwise, the recorder will start recording when the connected appliance's power is turned on.

●Auto Satellite Prog recording and timer-recording cannot be done at the same time.

●Auto Satellite Prog recording is only possible with the rear AUDIO/VIDEO IN connectors.

●When the Auto Satellite Prog Rec mode is engaged or the recorder's power is turned off after Auto Satellite Prog recording is finished, the recorder will not enter the Timer mode even though “AUTO TIMER” is set to “ON”.

●For timer programming of the satellite receiver, refer to the instruction manual of the satellite receiver.

●Auto Satellite Prog recording is not possible if your satellite receiver does not have a timer.

●The REC LINK indicator blinks while Auto Satellite Prog recording is in progress.

●Pressing the recorder's button while Auto Satellite Prog recording is in progress turns off and recorder's power and disengages the Auto Satellite Prog Rec mode.

●If there is more than one satellite program you wish to record with Auto Satellite Prog Recording, it is not possible to set a different tape speed for each; the tape speed selected in step 1 will apply to all the programs for Auto Satellite Prog recording.

●The B.E.S.T. ( ☞ pg. 20) does not work while Auto Satellite Prog recording is in progress.

●Depending on the type of satellite receiver, the recorder may not record a short portion at the beginning of the program or may record slightly longer than the actual length of the program.

●If you engage the Auto Satellite Prog Rec mode when the satellite receiver's power is on, the recorder will not start Auto Satellite Prog recording even though the REC LINK indicator blinks. When the satellite receiver shuts off once and is turned back on again, the recorder starts recording.

●You can also record a program from your cable system in the same way if the system has a timer and is connected to the recorder's rear AUDIO/VIDEO IN connectors.

●When you press the recorder's REC LINK button to engage the Auto Satellite Prog Rec mode, if the REC LINK indicator does not light but instead blinks quickly even though your satellite receiver's power is off, Auto Satellite Prog Recording will not work properly with that satellite receiver*.

If this is the case, perform “Express Timer Programming” ( ☞ pg. 26) to timer-record a satellite program.

*Some satellite receivers output signals even if the power is off. Auto Satellite Prog Recording is not possible with those satellite receivers.

Page 30 Page 32
Image 31
Page 30 Page 32
Contents HR-J777MS HR-J677MS Safety First Safety PrecautionsDo not place the recorder Connections BasicEN I Nitial Sett Ings Access Video Channel SET ModeVideo Channel Set Select TV SystemSET SET Video ChannelFinish Video Channel SET Finish Video ChannelSET Date Auto Set UpSelect Language SET TimePress OK or Push JOG Þ During Auto Set UpStart Auto Channel SET Major Countries/Areas TV SystemTurn on the Recorder Access Main Menu ScreenENABLE/DISABLE ON-SCREEN Display On-Screen DisplaysSelect Language Access Initial SET ScreenClock Set Start Playback Basic PlaybackLoad a Cassette PointActivate HIGH-SPEED Search Playback FeaturesSearch PlaybackActivate Instant Review Adjust Tracking ManuallyOverride Automatic Tracking Return to Automatic TrackingEN Playback Activate Index SearchSkip Over Unwanted SectionsPicture Control Access Main Nenu ScreenSET Mode Tape Position IndicatorTrack Soundtrack SelectionUSE Basic Recording Recording Features Type of Broadcast On-screen Display Being Received Receiving Stereo Bilingual ProgrammesTo Record Stereo Bilingual Programmes A2 To Record Nicam Stereo Bilingual ProgrammesPreparation S.T. Picture SystemJogþ During B.E.S.T RecordingPlayback Or press Record on the recorderEN Timer Recording System SetupAccess Initial SET Screen Access G-CODE Showview Setup ScreenNumber keys to input Number of the recorders Enter Receiving Channel Position NumberReceived. Then press OK or Timer Programming Return to Normal Timer ModeEngage Recorders Enter Channel Position Express TimerEnter Programme Stop Time Enter Programme DateEngage Recorders Timer Mode Return to Timer Mode Disengage Timer Mode Check, Cancel And Replace Programmes Ping Programmes Cancel or ChangeProgramme Setting Confirm the OverlapAuto SP→LP Timer Auto Timer Timer RecordingAuto SP→LP Timer Automatic Sat- ellite Program Recording REC Linc indicatorBefore performing the following steps RE-SUPPLY Power Remote Control FunctionsRemove Power Supply SET Remote Control CodeTV Brand Name Code TV Multi-brand Remote ControlSET TV Brand Code TV/VCR, TVTV PR +/-,NUMBER keys Multi-brand Remote ControlSET Brand Code Operate UnitDVD Brand Name Code Cable Box or Satellite Re- ceiver Multi-brand CodeDVD Multi-brand Code Cable BOX Brand Name CodeStart Source Player SET Recording Decks Input ModeEdit To Or From Another Video Recorder Make ConnectionsStart Camcorder SET Recorders Input ModeSelect Edit for Picture Control SET Mode Edit From a CamcorderDescription Setting Of The Colour System Select ButtonsMode Display Off-Air RecordingDubbed tape Tape-To-Tape EditingRecorded tape Playback equipmentTuner SET Access Main MenuAccess Tuner SET Select Auto CH SETManual Channel Set Access Channel ListSelect Position SET Desired StationJOG% EN Tuner SETDelete a Channel Swap Channel PositionsPush JOG Þ Fine-Tuning ChannelsEngage and adjust tracking manually. pg EN TroubleshootingIf youre using the RF OUT connec- tion Press Play to turn the indicator off Check the cassetteRecording New one. pg RoubleshootingPlayback Recording Quest Ions and Answers ENFront View IndexDisplay Panel Be used to operate your TV pg EN IndexSpecif Ications Auto Head CleanerHR-J677MS
Top Page Image Contents