JVC HR-J777MS, HR-J677MS SET Video Channel, Finish Video Channel SET, Set, With AV Connection

Page 5

3

4

SET VIDEO CHANNEL

Set your TV to UHF channel 40.

If the two vertical white bars appear clearly on the screen as shown in the illustration ("TEST SIGNAL" on page 4), press OK and then go to step 4.

If the two vertical white bars do not appear clearly, press OK and then PR + or to set the video recorder to a vacant channel between 28 and 60 which is not occupied by any local station in your area.

(Ex.) If channel 50 is available in your area

Then set your TV to UHF channel 50 and check if the two vertical white bars appear clearly on the screen; if so, go to step 4. If not, re-set the video recorder to another vacant channel and try again.

NOTES:

If you set the video recorder to a channel which is occupied by a local station or has neighbouring channels that are occupied by local stations, the picture reception quality will be affected and some interference noise will appear on the TV screen. Be sure to select a vacant channel which has no broadcast on neighbouring channels.

If you cannot obtain the two vertical white bars clearly with any channel between 28 and 60, consult your JVC dealer.

FINISH VIDEO CHANNEL SET

Press OK.

If Auto Set Up (pg. 6) or Tuner Set (pg. 40) has not previously been performed, the Language Select screen appears and Auto Set Up function takes place automatically.

EN5

With AV Connection

IMPORTANT:

Before performing the following steps, make sure the recorder's power is off and there is no cassette inserted in the recorder.

ACCESS VIDEO CHANNEL SET MODE

 

Hold down STOP/EJECT on the recorder until the

1

display panel shows the following.

 

 

 

 

 

 

 

 

 

 

SET VIDEO CHANNEL

 

Press OK, then press PR – until the display panel shows

2

the following.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Now the video channel is set to off (– –).

 

 

 

 

 

 

FINISH VIDEO CHANNEL

3

SET

Press OK.

 

 

 

 

If Auto Set Up (pg. 6) or Tuner Set (pg. 40)

 

has not previously been performed, the Language

 

 

Select screen appears and Auto Set Up function

 

 

takes place automatically.

To view picture signals from the video recorder, set your TV to its AV mode.

Be sure to connect the power plug to an AC outlet first before installing the lithium battery; otherwise, the battery's service life will be drastically shortened.

Installing/Removing the lithium battery

1Make sure that the power plug is connected to an AC outlet and turn off the recorder power.

2Open the battery cover while pressing the release tab as illustrated.

3Insert a lithium battery with the plus (+) side up and push it in.

To remove the lithium battery, press the latch A down- ward using a pointed non-metallic object, then pull out the lithium battery.

4Close the battery cover until it clicks in place.

A

Image 5
Contents HR-J777MS HR-J677MS Do not place the recorder Safety PrecautionsSafety First Connections BasicVideo Channel Set Access Video Channel SET ModeSelect TV System EN I Nitial Sett IngsFinish Video Channel SET SET Video ChannelFinish Video Channel SETSelect Language Auto Set UpSET Time SET DateStart Auto Channel SET During Auto Set UpMajor Countries/Areas TV System Press OK or Push JOG ÞENABLE/DISABLE ON-SCREEN Display Access Main Menu ScreenOn-Screen Displays Turn on the RecorderSelect Language Access Initial SET ScreenClock Set Load a Cassette Basic PlaybackPoint Start PlaybackSearch Playback FeaturesPlayback Activate HIGH-SPEED SearchOverride Automatic Tracking Adjust Tracking ManuallyReturn to Automatic Tracking Activate Instant ReviewSkip Over Unwanted Activate Index SearchSections EN PlaybackSET Mode Access Main Nenu ScreenTape Position Indicator Picture ControlUSE Soundtrack SelectionTrack Basic Recording Recording Features To Record Stereo Bilingual Programmes A2 Receiving Stereo Bilingual ProgrammesTo Record Nicam Stereo Bilingual Programmes Type of Broadcast On-screen Display Being ReceivedJogþ S.T. Picture SystemPreparation Playback RecordingOr press Record on the recorder During B.E.S.TAccess Initial SET Screen System SetupAccess G-CODE Showview Setup Screen EN Timer RecordingReceived. Then press OK or Enter Receiving Channel Position NumberNumber keys to input Number of the recorders Timer Programming Engage Recorders Timer ModeReturn to Normal Enter Programme Stop Time Express TimerEnter Programme Date Enter Channel PositionEngage Recorders Timer Mode Check, Cancel And Replace Programmes Disengage Timer ModeReturn to Timer Mode Programme Setting Cancel or ChangeConfirm the Overlap Ping ProgrammesAuto SP→LP Timer Timer RecordingAuto SP→LP Timer Auto Timer Before performing the following steps REC Linc indicatorAutomatic Sat- ellite Program Recording Remove Power Supply Remote Control FunctionsSET Remote Control Code RE-SUPPLY PowerSET TV Brand Code TV Multi-brand Remote ControlTV/VCR, TV TV Brand Name CodeSET Brand Code Multi-brand Remote ControlOperate Unit TV PR +/-,NUMBER keysDVD Multi-brand Code Cable Box or Satellite Re- ceiver Multi-brand CodeCable BOX Brand Name Code DVD Brand Name CodeEdit To Or From Another Video Recorder SET Recording Decks Input ModeMake Connections Start Source PlayerSelect Edit for Picture Control SET Mode SET Recorders Input ModeEdit From a Camcorder Start CamcorderMode Display Setting Of The Colour System Select ButtonsOff-Air Recording DescriptionRecorded tape Tape-To-Tape EditingPlayback equipment Dubbed tapeAccess Tuner SET Access Main MenuSelect Auto CH SET Tuner SETSelect Position Access Channel ListSET Desired Station Manual Channel SetDelete a Channel EN Tuner SETSwap Channel Positions JOG%Push JOG Þ Fine-Tuning ChannelsIf youre using the RF OUT connec- tion EN TroubleshootingPress Play to turn the indicator off Check the cassette Engage and adjust tracking manually. pgRecording New one. pg RoubleshootingPlayback Recording Quest Ions and Answers ENFront View IndexDisplay Panel Be used to operate your TV pg EN IndexSpecif Ications Auto Head CleanerHR-J677MS

HR-J677MS, HR-J777MS specifications

The JVC HR-J777MS and HR-J677MS are standout VCR models that highlight the evolution of video recording technology during their time. These models are particularly noted for their excellent performance in playback and recording, catering to the increasing demand for high-quality home video entertainment.

One of the main features of both models is their Super VHS (S-VHS) compatibility. This technology provides a significantly enhanced resolution compared to standard VHS, resulting in sharper images and improved color fidelity. For users who want to preserve their precious memories in better quality, the ability to play S-VHS tapes is a significant advantage.

Both HR-J777MS and HR-J677MS come equipped with advanced video processing technology to enhance playback quality. The focus on noise reduction ensures clearer playback of tapes, while the dynamic range expands the overall picture quality, making it more immersive for viewers. These models are designed to handle various tape formats, providing versatility for users with different media collections.

Another noteworthy characteristic is the built-in digital tuner, which allows users to record digital television broadcasts. This feature is particularly useful as it enables users to access a wider variety of channels and content without the need for additional external devices, further simplifying the user experience.

The convenience of timer programming is also a prominent feature in these models. Users can easily set up recordings for their favorite shows by programming the VCR to start and stop automatically, even when they are not home. This functionality makes these VCRs an ideal choice for busy households where time management is essential.

In terms of design, the JVC HR-J777MS and HR-J677MS models have a compact and aesthetically pleasing build, making them easy to integrate into any home entertainment system. The user-friendly interface and remote control functionality enhance the overall usability, allowing consumers to navigate through features effortlessly.

Additionally, the models offer various playback features such as slow motion, frame advance, and various tracking options to ensure optimal playback quality, accommodating different viewing preferences.

Overall, the JVC HR-J777MS and HR-J677MS stand out for their robust features, solid technological advancements, and user-friendly design, making them reliable choices for VHS enthusiasts and casual users alike. With their blend of durability and performance, these VCRs continue to be valued in the realm of home video equipment.