JVC HR-J781AM, HR-J787AM Information on Multi-System Compatibility, Off-Air Recording, Playback

Page 13

Information on Multi-System Compatibility

Off-Air Recording

The built-in multi-system tuner is capable of receiving PAL B/G, I and D/K, and SECAM B/G and D/K and NTSC* broadcasts.

TV system

HR-J787AM/HR-J781AM

Recorded tape

 

Multi-system

 

 

tuner

 

 

(B/G, I, D/K, M*)

 

 

* HR-J787AM only

 

NOTE:

This model does not operate in BRAZIL (PAL-M) or ARGENTINA (PAL-N).

Playback

 

This recorder can play back all 3 types of recorded tape.

Recorded tape

HR-J787AM/HR-J781AM

 

Playback circuit

 

Built-in

 

RF converter

 

K, I, G, H, M*

 

Manual switching

Manual switching

 

 

* HR-J787AM only

Multi-system receiver

Multi-system monitor

NOTES:

When viewing NTSC tapes on a PAL TV set:

The picture may shrink vertically with black bars appearing at the top and bottom of the screen. This is not a malfunction on the part of the video recorder nor the TV.

The picture may roll up or down. This can be corrected using the V-HOLD control found on some TVs. (This cannot be corrected if the TV does not have a V-HOLD control.)

During search, still, or frame-by-frame playback, the picture will be distorted, and there may be a loss of colour.

ATTENTION:

When this recorder is connected to a multi-system TV, the audio signal may not be heard or may be noisy if the colour system select switch of the TV is adjusted to the AUTO position. In such a case, set the TV’s colour system select switch to the appropriate position which corresponds to the TV system you have selected at the TV System Select screen.

Image 13
Contents Power System Safety PrecautionsVideo heads cleaning How to use the remote controlFront Panel Rear PanelBasic Connections Remote controlOn-screen display RF ConnectionAuto Set Up Initial SettingsInstalling/Removing the lithium battery Video Channel SetPlayback Clock SettingBasic Playback Playback Features Specifying recording length Instant Timer Recording ITR Recording FeaturesRecording Basic RecordingAccess G-CODE/SHOWVIEWSetup screen Timer RecordingGuide Program Number Set Input Guide Prog numberAccess Program screen Express Timer ProgramingDisengage timer Cancel or change program setting Reengage timer recording standby modeOther Functions Function settingsChecking tape position TV Brand Setting Multi-Brand Remote ControlSatellite Auto Recording Editing To control two recorders with the same remote controlOff-Air Recording Information on Multi-System CompatibilityPlayback TV system HR-J787AM/HR-J781AMTape-To-Tape Editing Tuner SettingAuto Channel Set Manual Channel SetDelete a Channel Fine-Tuning ChannelsSwap Channel Positions Specifications