JVC HR-J787AM manual Front Panel, Rear Panel, How to use the remote control, Video heads cleaning

Page 2

3.DO NOT place heavy objects on the recorder or remote control.

4.DO NOT place anything which might spill on top of the recorder or remote control.

(If water or liquid is allowed to enter this equipment, fire or electric shock may be caused.)

5.DO NOT expose the apparatus to dripping or splashing.

6.DO NOT use this equipment in a bathroom or places with water. Also DO NOT place any containers filled with water or liquids (such as cosmetics or medicines, flower vases, potted plants, cups, etc.) on top of this unit.

7.DO NOT place any naked flame sources, such as lighted candles, on the apparatus.

8.AVOID violent shocks to the recorder during transport.

MOISTURE CONDENSATION

Moisture in the air will condense on the recorder when you move it from a cold place to a warm place, or under extremely humid conditions—just as water droplets form on the surface of a glass filled with cold liquid. Moisture condensation on the head drum will cause damage to the tape. In conditions where condensation may occur, keep the recorder’s power turned on for a few hours to let the moisture dry.

How to use the remote control

The remote control can operate most of your recorder’s functions, as well as basic functions of TV, cable box, satellite receiver, and DVD sets of JVC and other brands.

Point the remote control toward the sensor window on the target component.

The maximum operating distance of the remote control is about 8 m.

NOTES:

When inserting the batteries, be sure to insert in the correct directions as indicated under the battery cover.

If the remote control does not work properly, remove its batteries, wait for a few seconds, replace the batteries and then try again.

Video heads cleaning

Use a dry cleaning cassette — TCL-2UX — when:

Rough, poor picture appears while a tape is played back.

The picture is unclear or no picture appears.

“USE CLEANING CASSETTE” appears on the screen (only with “O.S.D.” set to “ON”).

Buttons, Connectors and Indicators

Front Panel

Cassette loading slot

VIDEO/AUDIO input connectors

Infrared beam receiving window

Display panel

Timer mode indicator

REC LINK indicator

 

 

Play indicator

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Record

 

 

 

 

 

 

 

 

 

 

REVIEW

indicator

 

 

 

 

 

 

 

 

 

indicator

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Channel and auxiliary input/Clock time

Rear Panel

Lithium battery

Mains power cord compartment

Image 2
Contents Safety Precautions Power SystemFront Panel How to use the remote controlVideo heads cleaning Rear PanelOn-screen display Remote controlBasic Connections RF ConnectionInstalling/Removing the lithium battery Initial SettingsAuto Set Up Video Channel SetBasic Playback Clock SettingPlayback Playback Features Recording Recording FeaturesSpecifying recording length Instant Timer Recording ITR Basic RecordingGuide Program Number Set Timer RecordingAccess G-CODE/SHOWVIEWSetup screen Input Guide Prog numberDisengage timer Cancel or change program setting Express Timer ProgramingAccess Program screen Reengage timer recording standby modeChecking tape position Function settingsOther Functions Satellite Auto Recording Multi-Brand Remote ControlTV Brand Setting To control two recorders with the same remote control EditingPlayback Information on Multi-System CompatibilityOff-Air Recording TV system HR-J787AM/HR-J781AMAuto Channel Set Tuner SettingTape-To-Tape Editing Manual Channel SetSwap Channel Positions Fine-Tuning ChannelsDelete a Channel Specifications