JVC HR-J781EU You can set the B.E.S.T. Biconditional Equalised Signal, Playback, Lot of noise

Page 41

 

 

EN 41

 

 

* The default setting is bold in the table below.

 

 

 

8 B.E.S.T.

 

You can set the B.E.S.T. (Biconditional Equalised Signal

ON

 

Tracking) system to “ON” or “OFF” ( pg. 23).

OFF

 

 

 

 

8 PICTURE CONTROL

This feature helps you to adjust the playback picture

AUTO:

Provides the optimised picture

quality according to your preference. Normally select

 

benefits of the B.E.S.T. Picture

“AUTO”.

EDIT:

System.

NOTES:

Minimizes picture degradation

 

during editing (recording and

● When you select “EDIT”, “SOFT” or “SHARP”, the selected

 

playback).

mode will not change until you select another mode.

SOFT:

● When you select “EDIT” to dub tapes, be sure to select “AUTO”

Reduces image coarseness when

after you finish dubbing the tapes.

 

viewing overplayed tapes containing

 

● When “B.E.S.T.” is “OFF”, “PICTURE CONTROL” switches

 

a lot of noise.

SHARP:

automatically from “AUTO” to “NORM”.

Clearer, sharper-edged picture when

 

 

viewing images with lots of flat,

 

 

same-coloured surfaces such as

 

 

cartoons.

 

 

 

8 AUTO TIMER

When this function is set to “ON”, the timer is

ON

 

automatically engaged when the recorder power is turned

OFF

 

off, and automatically disengaged when the recorder is

 

 

powered back on.

 

 

NOTE:

 

 

For safety, when “AUTO TIMER” is set to “OFF”, all other recorder

 

 

functions are disabled while the Timer mode is engaged. To

 

 

disengage the timer, press # (TIMER).

 

 

 

8 O.S.D.

 

When this function is set to “ON”, various operational

ON

 

indicators appear on the TV screen. Messages appear in

OFF

 

the selected language ( pg. 11 or 12).

 

 

NOTES:

 

 

● When you use this recorder as the source player for editing, be

 

 

sure to set “O.S.D.” to “OFF” before starting.

 

 

● During playback, the operation mode indicators may be

 

 

disturbed depending on the type of tape being used.

 

 

 

8 DIRECT REC

 

When this function is set to “ON”, you can easily start

ON

 

recording the programme that you are watching on your

OFF

 

TV. Press and hold 7 and press 4 on the remote control,

 

 

or press 7 on the recorder.

 

 

NOTES:

 

 

● When you use the Direct Rec function, be sure to use a TV

 

 

offering T-V LINK, etc. and connect a fully-wired 21-pin SCART

 

 

cable between the recorder and the TV ( pg. 7).

 

 

● If “DIRECT REC” is set to “OFF”, the 7 button functions as

 

 

described in “Basic Recording” ( pg. 20).

 

 

● During the Direct Rec, “– –” appears on the front display panel.

 

 

 

Page 40 Page 42
Image 41
Page 40 Page 42
Contents Video Cassette Recorder English Safety Precautions Moisture Condensation Front View Front Display Panel ON-SCREEN Display Operating JVC TVs How To UseSituate the recorder Check the contentsConnect the recorder to TV Connect the recorder to mainsTurn on the recorder Auto Set UpSelect your country Before starting, make sure of the followingSelect the language Perform Auto Set UpOn the front display panel On the on-screen display10 EN Perform Preset DownloadSet the video channel Press rt to select CH - and press OK or eJust Clock Language for the on-screen displayAccess the Country Set screen Access the Main Menu screenLanguage 12 ENSituate the Satellite Controller Installing Satellite ControllerAttach the Satellite Controller Make connections14 EN Setting satellite receivers brand and channelVCR Auto Standby Direct Rec TV Auto Power OnNexTView Link 16 EN Basic PlaybackPause during playback High-Speed SearchActivate Frame-by-frame playback Push the JOG dial PressVariable Speed Search Including Slow Motion 18 ENManual Tracking Instant ReViewSkip Search Index SearchNext Function Memory Repeat Playback20 EN Engage the ITR mode Instant Timer Recording ITRWatching Another Set the recording duration22 EN Reset the counterTape Remaining Time Receiving Stereo And Bilingual ProgrammesRecording PlaybackAccess the Showview Program screen Access the Showview screenBefore performing the Showview Timer Programming 24 ENEngage the recorder’s timer mode Set the VPS/PDC modeSatellite Receiver Users Guide Program Number Set26 EN Express Timer ProgrammingVPS/PDC Recording To Timer-Record Weekly Or Daily SerialsEnter the channel position Press PR +Before performing the 24 Hour Express Timer Programming Enter the programme mode28 EN Set the programme start/stop time and channelCancel or change a programme Check, cancel and change programmesReturn to the timer mode Disengage the timer modeConfirm the overlapping programmes Cancel or change programme settingSelect the programme to modify Overlapping programmes blink on the TV screenEngage the Auto Satellite Programme Recording mode Select the L-2 Select modeProgramme Recording Before performing the following steps32 EN Edit From a CamcorderAnother Video Recorder Set the input mode of recording deckStart the source player Start the recording deck34 EN Audio DubbingLocate the start point Engage the Audio Dubbing modeStart dubbing End Audio DubbingConnecting To a Satellite Receiver Connect the decoder Select the input modeSet the tuner Set L-2 Select to DECODER.  pgMake connections 38 ENGuide Program Number Set Showview System SetupGuide Program Number Enter the Guide Program numberAccess the Mode Set screen Mode SetSelect the mode Select the mode settingThis feature helps you to adjust the playback picture You can set the B.E.S.T. Biconditional Equalised SignalWhen this function is set to ON, the timer is Off, and automatically disengaged when the recorder isFor Example 42 ENAbout Ntsc Playback 44 EN Access the Clock Set screenClock Set Set Just Clock Set the date and timeSet the source channel position for clock data Start the clock operationTuner Set Access the Auto Channel Set screen46 EN Auto Channel SetPress OK twice Perform Auto Channel SetView the Confirmation screen Manual Channel Set 48 ENDelete a Channel When Receiving a Scrambled BroadcastSet Stations B 50 ENSet Stations a Station Name TV Station And ID ListExit the Video Channel Set mode Access the Video Channel Set modeVideo Channel Set 52 ENPower Recording 54 ENOther Problems Playback 56 ENHorizontal resolution Signal-to-noise ratio 45 dBMemory backup time Approx min Scan system58 EN Memo

HR-J781EU, HR-J780EU specifications

The JVC HR-J780EU and HR-J781EU are two impressive VCR models that showcase JVC's commitment to providing high-quality video recording and playback. Released during the height of VHS technology, these models stand out due to their robust features, advanced technologies, and user-friendly characteristics, making them a popular choice among enthusiasts and casual users alike.

One of the standout features of both models is the incorporation of JVC’s innovative Digital Scene Selector technology. This allows for enhanced image processing, resulting in sharper and clearer video quality. The Digital Scene Selector analyzes incoming video signals and optimizes them in real-time, ensuring that every frame is rendered to its fullest potential.

Both the HR-J780EU and HR-J781EU come equipped with a Time Base Corrector (TBC), which significantly improves the stability of the video image. This technology reduces jitter and enhances overall playback quality, making these VCRs excellent for archiving and preserving precious home videos. The TBC is particularly beneficial when playing back older tapes that may have degraded over time.

Another key characteristic of the JVC HR-J780EU and HR-J781EU is their ability to support long-play (LP) recording modes. This feature enables users to store more content on a single tape, doubling the recording capacity without a noticeable dip in quality. For regular viewers and home movie creators, this is an excellent advantage, allowing for longer viewing and recording sessions without the hassle of frequently changing tapes.

Both models are equipped with a comprehensive set of connectivity options, including SCART and composite outputs, making it easy to connect to various TVs and other playback devices. Additionally, the inclusion of an easy-to-navigate on-screen menu enhances user experience, allowing users to quickly access settings and functionalities.

Moreover, the JVC HR-J780EU and HR-J781EU boast built-in auto tracking features, which automatically adjust the tape heads to maintain optimal playback quality. The sleek design, combined with a remote control for convenience, makes these VCRs both aesthetically pleasing and practical.

In summary, the JVC HR-J780EU and HR-J781EU are finely crafted VCR models that showcase advanced recording technologies, user-friendly features, and excellent performance characteristics. For those looking to relive nostalgic moments captured on VHS tapes, these models provide a reliable and high-quality option for both recording and playback.
Top Page Image Contents