– Playback –
Playing back tape repeatedly (100 times)
—Repeat Play
During playback, press and hold PLAY (4) for more than
5 seconds. The play indicator ($) on the display panel starts blinking slowly. To stop playback, press STOP (8) on the Remote or STOP/EJECT (0) on the VCR.
Locating beginning of recordings
—Index Search
Index codes are placed on the tape at the beginning of each recording when recording on this VCR.
AWhile the tape is not running, press SHUTTLE PLUS 2or 6on the Remote to start search.
BTo access a recording of 2 to 9 index codes away, press 2or 6 repeatedly until the correct number is displayed on the screen (only if
| “SUPERIMPOSE” is set to “ON”). |
|
|
| INDEX 1 | |||||||||||
| Playback begins automatically when |
|
|
|
| |||||||||||
| the desired recording is located. |
|
|
|
| |||||||||||
| Beginning of the |
| Current | Beginning of the | ||||||||||||
|
| current program |
|
|
| position on | 2nd next program | |||||||||
|
| recorded |
|
| the tape | recorded | ||||||||||
|
| Previous |
|
|
|
|
|
| Next | 2nd | next | |||||
|
|
|
|
|
|
|
| |||||||||
|
| program |
|
|
|
|
| program | ||||||||
|
| recorded |
|
|
|
|
| recorded |
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Locating beginning of timer recordings
—Instant Review
Press REVIEW on the Remote after ensuring that the VCR is in the timer recording standby mode.
●The VCR turns on, and rewinds to the index code indicating the beginning of the last
●You can access a program of 2 to 9 index codes away from the current position on the tape. If, for example, you have
5 programs recorded and you want to watch the third one, press REVIEW three times.
●The Instant Review function will also operate if the VCR is turned on.
Skipping unwanted portions
—Skip Search
Press SKIP SEARCH on the Remote once to 4 times during playback. Each press initiates a
Recording
It may be unlawful to record or play back copyrighted material without the consent of the copyright owner.
Accidental erasure prevention
To prevent accidental recording on a |
|
recorded cassette, remove its record |
|
safety tab. To record on it later, cover |
|
the hole with adhesive tape. | Record safety tab |
Basic Recording
ALoad a cassette
Make sure the record safety tab is intact. If not, cover the hole with adhesive tape before inserting the cassette.
●The VCR turns on, and the counter is reset, automatically.
BSelect recording channel
On the Remote
Press CH+/– or the Number keys.
On the VCR
Press PAUSE[CH]. The channel display on the display panel starts blinking. While the display is blinking, press FF[CH+] or
NOTES:
●You can select channel in the stop mode, recording pause mode or during rewind/fast-
forward.
● If no cassette is loaded, or during recording pause mode, you can select channel only by pressing FF[CH+] or
●If you connect the TV and the VCR only using the RF connection, press TV/VCR on the Remote so that the VCR mode indicator lights on the display panel, to view the program to be recorded.
CSet tape speed
Press SP/EP on the Remote. The selected tape speed will appear on the TV screen and the VCR display panel.
NOTE:
●You can select tape speed in the stop mode or during recording pause mode.
DStart recording
On the VCR, press REC (7). Or on the Remote, while holding REC (7), press PLAY (4).
During recording
Pause recording
Press PAUSE (9).
●Press PLAY (4) to resume recording.
●You can select channel in the recording pause mode.
Stop recording
Press STOP (8) on the | OR Press STOP/EJECT (0) on |
Remote. | the VCR. |
|
|
NOTE:
If the tape reaches its end during recording, the recording stops and “ ” and “ $” on the front display panel blink. Press STOP/ EJECT (0) on the VCR to eject the tape or press REW (3) to rewind the tape.