JVC HR-J748EE Basic Connections, Check Contents, Situate Recorder, Connect Recorder to Mains

INSTALLINGYOURNEWRECORDEREN

3

Basic Connections

Aerial terminal	RF Cable
	(provided)

Back of TV		TV
AV-IN terminals		Aerial
	AV Cable	Cable
	(not provided)

Mains Power

Cord

	Rear View
Mains
outlet		AUDIO OUT/	RF output channel
			adjustment screw
		VIDEO OUT

Connect the power plug to an AC outlet before installing the lithium battery. ☞ pg. 5

It's essential that your video recorder be properly connected. Follow these steps carefully. THESE STEPS MUST BE COM-

PLETED BEFORE ANY VIDEO OPERATION CAN BE PER- FORMED.

	CHECK CONTENTS
	Make sure the package contains all of the accessories
1 listed in “Specifications” (☞ pg. 43).
	SITUATE RECORDER
2 Place the recorder on a stable, horizontal surface.
	CONNECT RECORDER TO
3	TV
	The connection method you use depends on the type
	of TV you have.
	RF CONNECTION
	● To Connect To A TV With NO AV Input Terminals . . .
	a– Disconnect the TV aerial cable from the TV.
	b– Connect the TV aerial cable to the ANT. IN jack
	on the rear panel of the recorder.
	c– Connect the provided RF cable between the RF
	OUT jack on the rear panel of the recorder and
	the TV’s aerial terminal.
	Before operating the recorder, make sure the
	TV’s channel is set to the VIDEO channel
	(☞ pg. 5).

AV CONNECTION

●To Connect To A TV With AV Input Terminals . . .

a– Connect the aerial, recorder and TV as per “RF

CONNECTION”.

b– Connect an optional AV cable between the AUDIO OUT and VIDEO OUT connectors on the rear panel of the recorder and the TV’s AV-IN terminals .

Before operating the recorder, make sure the TV is set to the VIDEO (or AV) mode.

CONNECT RECORDER TO MAINS

4 Plug the end of the mains power cord into a mains outlet.

After you plug the mains power cord into a mains outlet, the Auto Set Up display appears on the TV screen and/or on the

recorder's front display panel when the button on the recorder/remote control is pressed for the first time to power on the recorder ☞ pg. 4.