JVC HR-J7004UM manual Make Connection, Tape Position Indicator, Next Function Memory

20

PLAYBACKANDRECORDINGFEATURES(cont.)

POWER

ª £

q

2 5/8 3

Tape Position Indicator

The Tape position indicator
appears on screen when, from the
stop mode, you press FF, REW or
perform an Index Search or Instant			+	+	+
ReView. The position of "	" in	B					E
relation to "B" (Beginning) or "E"
(End) shows you where you are on				COUNT		0:33:27
the tape.

NOTE:

MENU REW FF

SUPERIMPOSE must be set to ON, or the indicator will not appear (☞ pg. 17).

POWER

C.MEMORY

1 2 3

4 5 6

7 8 9

0

FF

REW

MENU

Next Function Memory

You can set your VCR's power to go off automatically after the tape is fully rewound. Before starting, make sure the VCR is in the Stop mode.

For Automatic Power Off After Tape Rewind . . .

. . . press REW, then press POWER within 2 seconds.

NOTE:

If you want the power to be turned off automatically when the counter reads “0H00M00S” (instead of at the beginning of the tape), press C.MEMORY so that the “M” mark appears before pressing REW.

AV COMPU LINK Playback

Your VCR is compatible with JVC’s AV COMPU LINK components, including amplifiers (or receivers) and televisions. AV COMPU LINK provides one touch control of the audio and video compo- nents that are linked via their AV COMPU LINK connectors.

For example: simply load a cassette in the VCR and press PLAY and the AV COMPU LINK components automatically power on, the TV's VIDEO mode is selected and the VCR goes into play mode. (PLAY need not be pressed if the cassette's record safety tab is removed.)

1	MAKE CONNECTION
	Connect your VCR to an AV COMPU LINK component
	as shown in the illustration on page 21.
	• The Mini-plug cable is a mono 3.5 mm mini-plug to
	mono 3.5 mm mini-plug connector.

2	TURN ON THE VCR
	Press POWER.
	ACCESS MAIN MENU
3	SCREEN
	Press MENU.