JVC HR-J7004UM manual Recording Features, Engage TV Mode, Select Channel for Viewing

Page 25

Recording Features

ª £

q

2 5/8 3

OSD

1 2 3

4

5

6

7 8 9

25

Record One Program While Watching Another

1	ENGAGE TV MODE
	During recording...
	● If using the RF connection (☞ pg. 4), press TV/VCR.
	The VCR's VCR indicator goes out and the TV
	broadcast being recorded disappears.
	● If using the AV connection (☞ pg. 4), change the
	TV's input mode from AV to TV.

SELECT CHANNEL FOR

VIEWING

2 Use the TV’s channel selector to set the channel you want to watch.

Display Elapsed Recording Time

RESET COUNTER TO ZERO

1 Before recording starts, press C.RESET. The counter resets to zero and displays the exact elapsed time as the tape runs.

DISPLAY ELAPSED TIME ON

SCREEN

C.RESET

0

2 During recording, press OSD at any time to see the elapsed time. All indications corresponding to the current status of the VCR are displayed for 5 seconds. The counter display remains on the screen indicating the elapsed time. Press OSD again to remove the display.

●Make sure "SUPERIMPOSE" is set to "ON" (☞ pg. 17).

●The indications are not be recorded.

Image 25

Contents HR-J7004UM This unit is produced to comply with Standard IEC Publ Dear CustomerContents Basic Connections Plug & Play Initial SettingsAuto Tuner Set During Plug & PlayClock Clock Setting Access Clock SETSET Date and Time Make CorrectionsAccess Tuner SET Access Main MenuAccess Band Screen TunerReturn to Normal Screen Perform Auto Channel SETAccess Manual Access AFC ScreenMake Selection Channel SET ScreenLoad a Cassette Simple PlaybackFind Program Start Point Start PlaybackSimple Recording Playback Features Adjust Manual Tracking Engage Manual Tracking ModeLayback and Recording Features RE-ENGAGE Automatic TrackingVideo Stabilizer Access Audio Monitor Access Function SETSelect The Soundtrack MixSuperimpose Skip Over Unwanted Sections Access Distant CodeStart Repeat Stop RepeatMemory Activate CounterReturn to Counter Position Zero Make Connection Tape Position IndicatorNext Function Memory AV Compu Link PlaybackAccess Function SET Screen System Screen S.T. Picture SystemPress and hold REC RecordingQuality of the tape Use, then recording Begins with the picture Level optimizedTape in use PlaybackEngage TV Mode Recording FeaturesReset Counter to Zero Select Channel for ViewingStereo And SAP Second Audio Program Access 2ND AudioTo Record SAP Programs To Record Stereo ProgramsEngage ITR Mode Instant Timer Recording ITRTimer Recording SET Recording DurationAccess Program SET Screen On-Screen Timer ProgrammingPush JOG, Cancel and Menu SET Program Information Engage Timer ModeAccess Program SET Disengage TimerCancel a Program RE-ENGAGE TimerAuto SP/EP Timer Access Main Menu ScreenSP mode Access Auto Timer Screen Access Auto TimerAuto Timer Or Push JOG%ÞEdit To Or From Another Edit From a Camcorder Access SpecialSET RECORDER’S Input ModeSet the camcorder to its play mode Access AUX Input ScreenSet your VCR to its record mode Select InputTurn on the TV SET Remote Control ModeSET TV Brand Code Operate TVTurn on the Cable BOX Cable Box Multi-Brand Remote ControlEnter Cable BOX Brand Operate Cable BOXTurn on the Satellite Receiver Special FeaturesEnter Satellite Receiver Brand Operate Satellite ReceiverPlayback Questions and Answer SMake sure the window side is up, Cassette gets stuck partwayTimer again Timer RecordingFront View IndexRear View Installing Batteries Remote Control ProvidedHow To Use Specifications EMO Memo HR-J7004UM