•Overview → Storage → Virtual Disks → Identify- Displays the Identify Virtual Disks page where
you can blink or unblink the virtual disks.
2. If you are on the Identify Component LED page:
• Select or deselect all component LEDs — Select the Select/Deselect All option and click Blink to
start blinking the component LEDs. Similarly, click Unblink to stop blinking the component LEDs.
• Select or deselect individual component LEDs — Select one or more component(s) and click
Blink to start blinking the selected component LED(s). Similarly, click Unblink to stop blinking the
component LEDs.
3. If you are on the Identify Physical Disks page:
• Select or deselect all physical disk drives or PCIe SSDs — Select the Select/Deselect All option
and click Blink to start blinking all the physical disk drives and the PCIe SSDs. Similarly, click
Unblink to stop blinking the LEDs.
• Select or deselect individual physical disk drives or PCIe SSDs — Select one or more physical disk
drives and click Blink to start blinking the LEDs for the physical disk drives or the PCIe SSDs.
Similarly, click Unblink to stop blinking the LEDs.
4. If you are on the Identify Virtual Disk page:
• Select or deselect all virtual disks — Select the Select/Deselect All option and click Blink to start
blinking the LEDs for all the virtual disks. Similarly, click Unblink to stop blinking the LEDs.
• Select or deselect individual virtual disks — Select one or more virtual disks and click Blink to start
blinking the LEDs for the virtual disks. Similarly, click Unblink to stop blinking the LEDs.
If the blink or unblink operation is not successful, error messages are displayed.
Blinking or Unblinking Component LEDs Using RACADM
To blink or unblink component LEDs, use the following commands:
racadm storage blink:<PD FQDD, VD FQDD, or PCIe SSD FQDD>
racadm storage unblink:<PD FQDD, VD FQDD, or PCIe SSD FQDD>
For more information, see the iDRAC RACADM Command Line Reference Guide available at dell.com/
esmmanuals.
248