Dell iDRAC8 manual Enabling or Disabling Smart Card Login Using Web Interface

Enabling or Disabling Smart Card Login Using Web Interface

To enable or disable the Smart Card logon feature:

1.In the iDRAC Web interface, go to Overview → iDRAC Settings → User Authentication → Smart Card .

The Smart Card page is displayed.

2.From the Configure Smart Card Logon drop-down menu, select Enabled to enable smart card logon or select Enabled With Remote RACADM. Else, select Disabled.

For more information about the options, see the iDRAC Online Help.

3.Click Apply to apply the settings.

You are prompted for a Smart Card login during any subsequent logon attempts using the iDRAC Web interface.

Enabling or Disabling Smart Card Login Using RACADM

To enable smart card login, use one of the following:

•Use the objects in the cfgSmartCard group with the config command.

•Use the objects in the iDRAC.SmartCard group with the set command.

For more information, see the iDRAC8 RACADM Command Line Interface Reference Guideavailable at dell.com/support/manuals.

Enabling or Disabling Smart Card Login Using iDRAC Settings Utility

To enable or disable the Smart Card logon feature:

1.In the iDRAC Settings utility, go to Smart Card. The iDRAC Settings Smart Card page is displayed.

2.Select Enabled to enable smart card logon. Else, select Disabled. For more information about the options, see iDRAC Settings Utility Online Help.

3.Click Back, click Finish, and then click Yes.

The smart card logon feature is enabled or disabled based on the selection.

171