Dell iDRAC8 Using iDRAC Service Module From iDRAC Web Interface, Using iDRAC Service Module From RACADM

Co-existence of OpenManage Server Administrator and iDRAC Service
Module
In a system, both OpenManage Server Administrator and the iDRAC Service Module can co-exist and
continue to function correctly and independently.
If you have enabled the monitoring features during the iDRAC Service Module installation, then after the
installation is complete if the iDRAC Service Module detects the presence of OpenManage Server
Administrator, it disables the set of monitoring features that overlap. If OpenManage Server Administrator
is running, the iDRAC Service Module disables the overlapping monitoring features after logging to the
OS and iDRAC.
When you re-enable these monitoring features through the iDRAC interfaces at a later time, the same
checks are performed and the features are enabled depending on whether OpenManage Server
Administrator is running or not.
Using iDRAC Service Module From iDRAC Web Interface
To use the iDRAC Service Module from the iDRAC Web interface:
1. Go to Overview → Server → Service Module.
The iDRAC Service Module Setup page is displayed.
2. You can view the following:
• Installed iDRAC Service Module version on the host operating system
• Connection status of the iDRAC Service Module with iDRAC.
3. To perform out-of-band monitoring functions, select one or more of the following options:
•OS Information — View the operating system information.
•Replicate Lifecycle Log in OS Log — Include Lifecycle Controller logs to operating system logs.
This option is disabled if OpenManage Server Administrator is installed on the system.
•WMI Information — Include WMI information.
•Auto System Recovery Action — Perform auto recovery operations on the system after a
specified time (in seconds):
–Reboot
–Power Off System
–Power Cycle System
This option is disabled if OpenManage Server Administrator is installed on the system.
Using iDRAC Service Module From RACADM
To use the iDRAC Service Module from RACADM, use the objects in the ServiceModule group. For more
information, see the iDRAC8 RACADM Command Line Interface Reference Guide available at dell.com/
support/manuals.
295