• Critical

4.Click Apply.

The Alert Results section displays the results based on the selected category and severity.

Filtering Alerts Using RACADM

To filter the alerts, use the eventfilters command. For more information, see the iDRAC8 RACADM Command Line Interface Reference Guide available at dell.com/support/manuals.

Setting Event Alerts

You can set event alerts such as e-mail alerts, IPMI alerts, SNMP traps, remote system logs, operating system logs, and WS events to be sent to configured destinations.

Related Links

Enabling or Disabling Alerts

Configuring Email Alert, SNMP Trap, or IPMI Trap Settings

Filtering Alerts

Configuring Remote System Logging

Configuring WS Eventing

Setting Event Alerts Using Web Interface

To set an event alert using the Web interface:

1.Make sure that you have configured the e-mail alert, IPMI alert, SNMP trap settings, and/or remote system log settings.

2.Go to Overview Server Alerts. The Alerts page is displayed.

3.Under Alerts Results, select one or all of the following alerts for the required events:

Email Alert

SNMP Trap

IPMI Alert

Remote System Log

OS Log

WS Eventing

4.Click Apply.

The setting is saved.

5.Under Alerts section, select the Enable option to send alerts to configured destinations.

6.Optionally, you can send a test event. In the Message ID to Test Event field, enter the message ID to test if the alert is generated and click Test. For the list of message IDs, see the Event Messages Guide available at dell.com/support/manuals.

Setting Event Alerts Using RACADM

To set an event alert, use the eventfilters command. For more information, see the iDRAC8 RACADM Command Line Interface Reference Guide available at dell.com/support/manuals.

174

Page 174
Image 174
Dell iDRAC8 Filtering Alerts Using Racadm, Setting Event Alerts Using Web Interface, Setting Event Alerts Using Racadm