Dell iDRAC8 - page 58

Object Description Usage Example
FanSpeedMax
OffsetVal
• Getting this variable reads
the fan speed offset value
in %PWM for Max Fan
Speed Offset setting.
• This value depends on
the system.
• Use FanSpeedOffset to
set this value using index
value 3
Values from 0-100 racadm get
system.thermalsettings
FanSpeedMaxOffsetVal
This returns a value such as “100”.
This means that when you use the
following command, it applies a fan
speed offset of Max (meaning full
speed, 100% PWM). In most cases,
this offset results in fan speeds
increasing to full speed.
racadm set
system.thermalsettings
FanSpeedOffset 3
FanSpeedMed
iumOffsetVa
l
• Getting this variable reads
the fan speed offset value
in %PWM for Medium Fan
Speed Offset setting.
• This value depends on
the system.
• Use FanSpeedOffset
object to set this value
using index value 2
Values from 0-100 racadm get
system.thermalsettings
FanSpeedMediumOffsetVal
This returns a value such as “47”.
This means that when you use the
following command, it applies a fan
speed offset of Medium (47% PWM)
over baseline fan speed
racadm set
system.thermalsettings
FanSpeedOffset 2
FanSpeedOff
set
• Using this object with get
command displays the
existing Fan Speed Offset
value.
• Using this object with set
command allows setting
the required fan speed
offset value.
• The index value decides
the offset that is applied
and the
FanSpeedLowOffsetVa
l,
FanSpeedMaxOffsetVa
l,
FanSpeedHighOffsetV
al, and
FanSpeedMediumOffse
tVal objects (defined
earlier) are the values at
which the offsets are
applied.
Values are:
• 0 - Low Fan
Speed
• 1 - High Fan
Speed
• 2 - Medium
Fan Speed
• 3 - Max Fan
Speed
• 255 - None
To view the existing setting:
racadm get
system.thermalsettings.FanS
peedOffset
To set the fan speed offset to High
value (as defined in
FanSpeedHighOffsetVal)
racadm set
system.thermalsettings.FanS
peedOffset 1
MFSMaximumL
imit
Read Maximum limit for MFS Values from 1 -
100
To display the highest value that
can be set using
MinimumFanSpeed option:
racadm get
system.thermalsettings.MFSM
aximumLimit
58