The Upload Custom SSL Certificate Signing Certificate page is displayed.
3. Click Browse and select the custom SSL certificate signing certificate file.
Only Public-Key Cryptography Standards #12 (PKCS #12) compliant certificate is supported.
4. If the certificate is password protected, in the PKCS#12 Password field, enter the password.
5. Click Apply.
The certificate is uploaded to iDRAC.
6. A pop-up message is displayed asking you to reset iDRAC immediately or at a later time. Click Reset
iDRAC or Reset iDRAC Later as required.
After iDRAC resets, the new certificate is applied. The iDRAC is not available for a few minutes during
the reset.
NOTE: You must reset iDRAC to apply the new certificate. Until iDRAC is reset, the existing
certificate is active.

Uploading Custom SSL Certificate Signing Certificate Using RACADM

To upload the custom SSL certificate signing certificate using RACADM, use the sslcertupload
subcommand, and then use the racreset command to reset iDRAC. For more information, see the
iDRAC8 2.00.00.00 RACADM Command Line Reference Guide available at www.dell.com/esmmanuals.
Downloading Custom SSL Certificate Signing Certificate
You can download the custom signing certificate using iDRAC Web interface or RACADM.

Downloading Custom Signing Certificate

To download the custom signing certificate using iDRAC Web interface:
1. Go to Overview → iDRAC Settings → Network → SSL.
The SSL page is displayed.
2. Under Custom SSL Certificate Signing Certificate, select Download Custom SSL Certificate Signing
Certificate and click Next.
A pop-up message is displayed that allows you to save the custom signing certificate to a location of
your choice.

Downloading Custom SSL Certificate Signing Certificate Using RACADM

To download the custom SSL certificate signing certificate, use the sslcertdownload subcommand. For
more information, see the iDRAC8 RACADM Command Line Interface Reference Guide available at
dell.com/support/manuals.
Deleting Custom SSL Certificate Signing Certificate
You can also delete an existing custom signing certificate using iDRAC Web interface or RACADM.

Deleting Custom Signing Certificate Using iDRAC Web Interface

To delete the custom signing certificate using iDRAC Web interface:
1. Go to Overview → iDRAC Settings → Network → SSL.
The SSL page is displayed.
2. Under Custom SSL Certificate Signing Certificate, select Delete Custom SSL Certificate Signing
Certificate and click Next.
102