Dell iDRAC8 manual Configuring Services Using Web Interface, Configuring Services Using Racadm

•SSH — Access iDRAC through firmware RACADM.

•Telnet — Access iDRAC through firmware RACADM

•Remote RACADM — Remotely access iDRAC.

•SNMP Agent — Enables support for SNMP queries (GET, GETNEXT, and GETBULK operations) in iDRAC.

•Automated System Recovery Agent — Enable Last System Crash Screen.

•VNC Server — Enable VNC server with or without SSL encryption.

Configuring Services Using Web Interface

To configure the services using iDRAC Web interface:

1.In the iDRAC Web interface, go to Overview → iDRAC Settings → Network → Services. The Services page is displayed.

2.Specify the required information and click Apply.

For information about the various settings, see the iDRAC Online Help.

Configuring Services Using RACADM

To enable and configure the various services using RACADM:

•Use the following objects with the config command:

–cfgRacTuneLocalConfigDisable

–cfgRacTuneCtrlEConfigDisable

–cfgSerialSshEnable

–cfgRacTuneSshPort

–cfgSsnMgtSshIdleTimeout

–cfgSerialTelnetEnable

–cfgRacTuneTelnetPort

–cfgSsnMgtTelnetIdleTimeout

–cfgRacTuneWebserverEnable

–cfgSsnMgtWebserverTimeout

–cfgRacTuneHttpPort

–cfgRacTuneHttpsPort

–cfgRacTuneRemoteRacadmEnable

–cfgSsnMgtRacadmTimeout

–cfgOobSnmpAgentEnable

–cfgOobSnmpAgentCommunity

•Use the objects in the following object groups with the set command:

–iDRAC.LocalSecurity

–iDRAC.LocalSecurity

–iDRAC.SSH

–iDRAC.Webserver

–iDRAC.Telnet

86