JVC HR-S5400U manual Set the switch to the position, Cassette gets stuck partway

Page 60

60EN

TROUBLESHOOTING

Before requesting service for a problem, use this chart and see if you can repair the trouble yourself. Small problems are often easily corrected, and this can save you the trouble of sending your VCR off for repair.

POWER

 

 

 

 

 

 

 

 

 

 

 

 

 

SYMPTOM

 

POSSIBLE CAUSE

 

CORRECTIVE ACTION

 

1. The power won’t come on.

 

● The power cord is disconnected.

 

Connect the power cord.

 

 

 

 

 

 

 

 

2.

The clock works, but the VCR’s

 

● The TIMER mode is engaged with

 

Press TIMER to disengage.

 

 

power won’t come on.

 

Auto Timer set to "OFF" (☞ pg. 47).

 

 

 

 

 

 

● The Child Lock mode is engaged.

 

Press and hold POWER on the remote

 

 

 

 

 

 

to disengage the mode (☞ pg. 59).

 

 

 

 

 

 

 

 

3.

The remote control won’t function.

 

● The batteries are discharged.

 

Replace the dead batteries with new ones.

 

 

 

 

 

 

Set the switch to the position.

 

 

 

 

 

 

 

TAPE TRANSPORT

 

 

 

 

 

 

SYMPTOM

 

POSSIBLE CAUSE

 

CORRECTIVE ACTION

 

1. The cassette gets stuck partway

 

● The cassette was inserted incorrectly.

 

Make sure the cassette's window is

 

 

during loading, and is ejected.

 

 

 

facing up, the rear label side is facing

 

 

 

 

 

 

you and the arrow on the front of the

 

 

 

 

 

 

cassette is pointing towards the VCR.

 

 

 

 

 

 

Then insert the cassette.

 

 

 

 

 

 

 

2. The tape stops during rewind or

 

● The Counter Memory indicator

 

Press C.MEMORY to disengage the

 

 

fast forward.

 

(“M”) is lit on the front display

 

Counter Memory mode and extin-

 

 

 

 

panel.

 

guish the indicator (☞ pg. 33).

 

 

 

 

 

 

 

PLAYBACK

 

 

 

 

 

 

 

 

 

 

 

 

 

SYMPTOM

 

POSSIBLE CAUSE

 

CORRECTIVE ACTION

 

1. The tape is running but the picture

 

● If you’re using the RF OUT connec-

 

Set the channel selector to channel 3

 

 

won’t appear.

 

tion (☞ pg. 6), the channel selector

 

or 4.

 

 

 

 

on the TV is set incorrectly.

 

 

 

 

 

 

● If you’re using the AV connection or

 

Set the TV receiver to its AV mode.

 

 

 

 

S-VIDEO connection (☞ pg. 6 or 7),

 

 

 

 

 

 

the TV receiver is set to the wrong

 

 

 

 

 

 

mode.

 

 

 

 

 

 

 

 

 

2. Noise appears during visual search.

 

● This is normal.

 

 

 

 

 

 

 

 

 

3. Breaks are noticeable in Hi-Fi

 

● Automatic tracking is engaged.

 

Disengage Auto Tracking and adjust

 

 

soundtrack.

 

 

 

the tracking manually (☞ pg. 28).

 

 

 

 

 

 

 

4. The playback picture is blurred or

 

● The video heads may be dirty.

 

The heads must be cleaned. Consult

 

 

interrupted, even though TV

 

 

 

your JVC dealer.

 

 

broadcasts are clear.

 

 

 

 

 

 

 

 

 

 

 

5. The Hi-Fi soundtrack cannot be

 

● The AUDIO MONITOR option at

 

Set AUDIO MONITOR to "HI-FI"

 

 

heard.

 

the Audio Select screen was set

 

(☞ pg. 31).

 

 

 

 

incorrectly.

 

 

 

 

 

 

 

 

 

 

Page 59 Page 61
Image 60
Page 59 Page 61
Contents HR-S5400U Dear Customer Do not place the VCRImportant Product Safety Instructions Product and cart combination Should be moved with care. QuickContents Connections ANTENNA-IN Video TV OUTVideo Plug & Play Setup Plug & PlayEN I Nitial Sett Ings Auto Clock Set/Auto Tuner SetInformation Turn on the TV and select the VCR channel 3 or 4 or AV mode LanguageClock Select Mode Access Select ScreensEN Initial Settings Select Host ChannelSelect D.S.T. Mode Select Time ZoneMake Corrections ManualTuner Information Access Tuner SET Screen Access AFC ScreenInitial Settings Make SelectionCable Box Control Situate ControllerAttach Controller Connect Cable BOX to VCRReturn to VCR PLUS+ SET-UP Screen Set Cable Box Output ChannelAccess Cable BOX Turn on Cable BOXBrand SET Screen Return to NormalVCR Plus+ Setup VCR Plus+ Guide Channel MatchingAccess Custom SET SET ScreenInput Guide Channel NumberDBS Receiver Control Connect DBS Receiver to VCRDBS receiver Antenna AudioSelect DBS Receiver Output Channel Return to Custom SET ScreenSet DBS Receiver Output Channel Turn on DBS Receiver Enter DBS Receiver BrandSet DBS Receiver Brand Brand CodeSimple Playback Load a CassetteFind Program Start Point Start PlaybackSimple Recording Playback Features Playback and Recording FEA Tures E NVariable-Speed Search/ Reverse Motion Playback Still Picture/Frame-By- Frame PlaybackEngage Manual Tracking Mode Adjust Manual TrackingActivate HIGH-SPEED SearchVideo Stabilizer Access Function SET Access SuperimposeSuperimpose Access Audio Select Access Audio MonitorSelect The Soundtrack MixAccess Distant Code Start SearchSkip Over Unwanted Sections Start Repeat Stop RepeatActivate Counter MemoryAccess Special Make ConnectionFunction Screen AV Compu Link PlaybackEnable AV Compu Link Playback Perform AV Compu Link PlaybackExample Access Video Active Video CalibrationCalibration Screen PreparationPlayback RecordingRecording Features Access S-VHS Mode VHS Super VHS and VHSAccess 2ND Audio Stereo And SAP Second Audio ProgramTo Record SAP Programs To Record Stereo ProgramsHi-Fi Audio Recording Level Control Press CH 5 or Shuttle Plus %Þ to moveArrow to Manual by Pressing CH 5 or Audio level meters. Set the level so that maximumVCR Plus+ Timer Programming EN Timer RecordingEngage Timer Mode Press just once to access the Auto Timer screenPress TIMER. The VCR turns off automatically CHECK/CORRECT Input DataOn-Screen Timer Programming Access ON-SCREENAccess Program SET MenuPLUSÞÞuntil the item you want to change begins Blinking. Then set as in stepOn the VCR CatvDisengage Timer Access Main Menu ScreenAccess Program SET Screen Cancel a ProgramAccess Auto Timer Auto TimerMove the highlight bar arrow to Auto Timer by Now skip to of the procedure belowInstant Timer Engage ITR ModeSET Recording DurationEdit To Or From Another Edit From a Camcorder Audio VideoVideo OUT Audio OUT Edit Access AUX Input Tape DUB ModeReturn to Function SET Input Mode Reset the CounterLocate END Point Locate Start PointEngage Insert Editing Start EditingEND Insert Editing Audio Dubbing recorder Engage Audio DubbingStart Dubbing END Audio DubbingTerminal JLIPJoint Level Interface Protocol Connector Information on J Terminal E NTerminal TV Multi-Brand Remote Control Turn on the TVSET TV Brand Code Operate TVCable Box Multi-Brand Remote Control Turn on the Cable BOXEnter Cable BOX Brand Operate Cable BOXEN Special Features DBS Receiver Multi-Brand Remote ControlTurn on the DBS Receiver Operate DBS ReceiverUnplug Vcrs Power SET Remote ControlPlug in Power Cord Turn VCR Power onSet the switch to the position Cassette gets stuck partwayTimer again RecordingRe-perform the VCR Plus+ setup Procedure pgOubleshooting Doesn’t work properlyQuestions and Answer S E N PlaybackMBR Multi-Brand Remote Code Setting List Of TermsIndex Select DBS Receiver Output ChannelFront View Rear View Remote Control How To UseEIA monochrome signal Year programmable timer20C to 60C -4F to140F Maximum recording timeHOW to Locate Your JVC Service Center For Servicing Only in U.S.A. E NWarranty Only in U.S.A Limited WarrantyMemo HR-S5400U

HR-S5400U specifications

The JVC HR-S5400U is a pioneering VHS home video recorder that offers a myriad of features tailored to enhance the viewing experience for its users. Launched in the 1990s, this model embodies the technological advancements of its time, making it a standout choice for anyone looking to capture and playback their favorite video content.

One of the main features of the HR-S5400U is its Super VHS (S-VHS) capability, which provides superior picture quality compared to standard VHS. This technology allows for enhanced resolution and clarity, making it ideal for users who demand high-quality video playback. Additionally, the recorder supports the S-VHS ET (Extended Technology) format, enabling users to play back standard VHS tapes with improved image quality. This versatility ensures that users can enjoy their entire collection of videos without compromising on quality.

The JVC HR-S5400U is equipped with an advanced multi-head system that contributes to exceptional video performance. With its enhanced 4-head technology, the recorder delivers smoother playback and better tracking capabilities. This feature minimizes tape wear and ensures consistent quality over time, allowing users to watch their cherished memories without worrying about deterioration.

Another significant characteristic of this model is its built-in Linear Audio System, which supports high-fidelity sound quality. The double-speed audio playback ensures that audio tracks maintain their clarity and richness, enhancing the overall multimedia experience. Additionally, the HR-S5400U is designed with a variety of playback features, including slow motion, frame-by-frame advance, and a programmable timer for recording schedules, making it user-friendly and convenient.

On the connectivity front, the HR-S5400U includes multiple composite outputs, making it easy to connect to televisions and other audio-visual equipment. It also features a dedicated S-video output, which maximizes the video quality when connected to compatible devices.

In summary, the JVC HR-S5400U is a remarkable VHS recorder that combines quality, versatility, and user-friendly features. With its S-VHS capability, advanced multi-head technology, and superior audio system, it remains a notable option for enthusiasts of vintage video recording and playback systems. Whether for preserving memories or enjoying classic films, the HR-S5400U offers a solid performance that continues to be appreciated by users today.
Top Page Image Contents