JVC HR-P41A manual Table of contents Precautions

Page 2

Table of contents

 

Precautions

Thank you for purchasing this JVC video cassette player. To ensure optimum performance of this unit, please read this instruction manual thoroughly.

Precautions

2

Controls and terminals

3

Wireless remote control

4

Connections

5

Setting the video channel

6

The video cassette

6

Playback

7

Playback features

8

Recording

9

Editing

9

Troubleshooting

10

Specifications

10

Features

3 system (PAL/MESECAM/NTSC)

NTSC playback (on PAL television)

RF output G/K switchable

Digital auto tracking

HQ (High Quality)

• Intelligent picture

Auto playback function

• Repeat playback

Shuttle search

Still and slow motion

Line recording

Automatic features

Auto power on

The video cassette player is automatically turned on when the tape is inserted.

Auto rewind

The video tape is automatically rewound when the end of the tape is reached during the play, recording or shuttle search forward mode.

Auto playback

If the video cassette’s safety tab has been removed, playback will begin automatically when the tape is inserted into the video cassette player.

Power off eject

Even when the video cassette player’s power is off, pressing the eject button will turn the power on and eject the tape. Once ejected, the power will be turned off again automatically.

Auto head cleaning

When a tape is loaded or ejected the VCP video head is cleaned automatically.

The rating plate and the safety caution are on the rear of the unit.

WARNING: DANGEROUS VOLTAGE IN- SIDE

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

The OPERATE button does not completely shut off mains power from the unit, but switches operating current on and off.

This unit is produced to comply with Standard IEC Publ. 65.

Please follow these precautions. Not doing so may result in damage to the VCP, remote control, or video cassette.

Avoid extreme heat and direct sunlight.

Avoid extreme cold.

Avoid extreme humidity.

Avoid dust.

Avoid places subject to vibrations.

Avoid strong magnetic fields.

Do not block the VCP’s ventilation openings.

Do not place anything heavy on the VCP or remote control.

Do not place anything which might spill on top of the VCP or remote control.

Do not place the VCP on cushions, pillows, or thick carpeting.

Use the VCP in a stable, horizontal position only.

Place cassettes in cassette cases and store vertically.

Beware of moisture condensation

Moisture in the air will condense on the VCP when you move it from a cold place to a warm place, or under extremely humid conditions — just as water droplets form on the surface of a glass filled with cold liquid. Moisture condensation on the head drum will cause damage to the tape. In conditions where condensation may occur, keep the VCP’s power turned on for a few hours to let the moisture dry.

When transporting

7Be sure to remove cassette from VCP before packing.

7Avoid violent shocks to the VCP during packing and trans- port.

PAL NTSC

7Only cassettes marked “VHS” can be used with this video cassette player.

2

Image 2
Contents HR-P41A Table of contents Precautions Rear panel Controls and terminalsFront panel Wireless remote control Installing batteriesConnection B ConnectionsConnection a basic TV systemVideo cassette Using the TV while the video cas- sette player is connectedAdjust the TV picture with the TV’s tuning controls Inserting a cassetteBefore proceeding Colour system output mode selec- tionPlayback Ntsc Playback on PAL TVPlayback features Editing To/From Another Recorder RecordingEditing PlayerAbout Head cleaning Troubleshooting SpecificationsProblem Check point Memo