JVC HR-P51A Before proceeding, Ntsc Playback on PAL TV, Colour system output mode selec- tion

Playback

NTSC, PAL and MESECAM video tapes can be played back on this video cassette player. Refer to the “Colour system output mode selection” section for details.

Before proceeding:

∙Turn on the power of the TV and video cassette player.

∙Make sure that the TV is set to the video channel or that the TV’s TV/VIDEO switch is set to VIDEO (refer to the “Setting the video channel” section for details).

	1		2			TV
				-	TVCH		+	OPERATE
				-	VOLUME		+	TV/VIDEO
						VIDEO
				TV/VIDEO				OPERATE
			INTELLIGENT	AUTO		- TRACKING +			2
			PICTURE
	OPERATE	STANDBY
SP/LP/EP			NTSC
NTSC 3.58/4.43			ON PAL TV	(+		-		+ (
	INTELLIGENT	LP/EP	NTSC3.58
RECORDING & PLAYBACK	PICTURE		NTSC4.43
					[	L		J
				REMOTE CONTROL UNIT

1 Load a pre-recorded cassette.

If the safety tab on the cassette is removed, playback will start automatically.

2 Press the Play £button to start playback.

7Press the Stop/Eject ¤button or the remote control’s

Stop button& to stop playback.

To fast forward or rewind the tape:

7From the stop mode, press the Fast forward Á or Rewind 1 button.

NTSC Playback on PAL TV

∙The vertical size of the playback picture will shrink and some picture “noise” may appear on the screen.

∙The playback picture may roll. In this case adjust the picture with the TV’s vertical hold knob (with some TV’s this adjust- ment may not be possible).

∙The colour of the playback picture may differ from the original.

∙In the forward/reverse shuttle search or still modes there may be no colour depending on the TV and video cassette player combination.

Colour system output mode selec- tion

To watch an NTSC tape, it will be necessary to select one of the following output modes.

Selecting the NTSC PLAYBACK ON PAL TV mode Select this mode to watch NTSC tapes on a PAL system TV.

NTSC

ON PAL TV

NTSC3.58

NTSC4.43

Selecting the NTSC 3.58 mode

Select this mode to watch NTSC tapes on a NTSC system TV.

NTSC

ON PAL TV

NTSC3.58

NTSC4.43

Selecting the NTSC 4.43 mode

Select this mode to watch NTSC tapes on a multi-system TV (that has an NTSC 4.43 setting).

NTSC

ON PAL TV

NTSC3.58

NTSC4.43

7