JVC HR-S29U manual To timer-record daily Monday-Friday or weekly serials

Page 35
PROGRAM 1

8

Set tape speed

9Press SP/EP to set the tape speed.

Return to normal screen

Press PROG. or OK.

“PROGRAM COMPLETED” appears on the screen for about 5 seconds, then normal screen appears.

•If “PROGRAM NOT COMPLETED PROGRAM OVERLAP” appears, you have another program overlapping the program you have just made.

The Program Check screen appears and conflicting programs will start blinking.

You can now correct the conflicting programs. See “When programs overlap each other” on

0page 38.

Engage timer recording standby mode

Press TIMER.

The VCR turns off automatically and “‰” is displayed on the front display panel.

EN 35

NOTES:

●Even if a power failure occurs, the VCR keeps your timer programs. However, the clock time, channel settings, and other menu settings are lost.

As a result, when the power is supplied again to this VCR after the power failure, the following will take place.

1.This VCR starts the Plug & Play setting automatically to restore the clock time and channel setting.

2.If the clock time and channel setting are restored correctly, each timer program you have made will start at its start time unless its end time has elapsed.

●Programs that start after midnight must have the next day’s date.

●After timer recording is completed, the VCR turns off automatically.

●You can program the timer recording while a regular recording is in progress; the menu screens will not be recorded.

●If the tape reaches its end during timer recording, the cassette is automatically ejected.

●To timer-record cable or satellite channels, be sure to keep the cable box or DBS receiver turned on.

To timer-record daily (Monday–Friday) or weekly serials

Press DAILY (M-F)(number “8”) or WEEKLY (number “9”) anytime during steps 3through 9.

“DAILY” or “WEEKLY” appears on the Program screen.

●Pressing the button again makes the corresponding indication disappear.

To use the VCR while it is in timer recording standby mode

Press TIMER to cancel the timer recording standby mode, then press POWER to turn on the VCR.

DO NOT forget to put the VCR into timer recording standby mode again by pressing TIMER after you use the VCR; otherwise, you cannot record the broadcast you want.

●When “AUTO TIMER” ( pg. 40) is set to “ON”, the timer recording standby mode is automatically engaged when the VCR is turned off. It is temporarily canceled when the VCR is turned on. You do not have to press TIMER to engage or disengage the timer recording standby mode.

ATTENTION FOR DBS RECEIVER USERS

If you are using a DBS receiver (unless “DBS

RECEIVER SET” is set to

 

START

STOP

 

8:00AM

 

=

 

9:00PM

 

“OFF”  pg. 19), the band

 

DATE

 

 

 

CH

 

 

12/24/00

 

 

 

110

 

SP

 

 

indication (TV, CATV or

 

 

 

 

 

 

 

SUN

 

 

 

DBS

 

 

 

DBS) appears under the

PRESS (+/–, SP/EP, 8=DAILY,

 

9=WEEKLY, 7=DBS), THEN (0K)

channel number

PRESS (PROG.) TO END

 

 

 

 

 

 

 

 

 

 

indication.

 

 

 

 

 

 

 

 

 

 

TV

:To timer-record a regular TV broadcast

 

received on the VCR.

 

 

 

 

 

 

 

 

 

 

CATV

:To timer-record a cable TV broadcast

 

received on the VCR, or through a cable box

 

(unless “CABLE BOX SET” is set to “OFF” 

 

pg. 16).

 

 

 

 

 

 

 

 

 

 

DBS

:To timer-record a satellite broadcast

 

received through a DBS receiver.

 

 

 

 

 

NOTE:

If “BAND” is set to “TV” on the Tuner Set screen

( pg. 13) and “CABLE BOX SET” is set to “OFF” on the Cable Box Set screen ( pg. 16), “CATV” will not be displayed on the Program screen; If “BAND” is set to “CATV” or “CABLE BOX SET” is set to “ON”, “TV” will not be displayed.

If the channel number entered requires that the band be set, “7=DBS” is displayed on the screen.

If this happens, press the Number key “7 (DBS)” to select “DBS”.

Page 34 Page 36
Image 35
Page 34 Page 36
Contents HR-S29U Telephone Number Dear CustomerGrounding or Polarization Power SourcesPower Lines Power Cord ProtectionReplacement Parts AccessoriesDamage Requiring Service CleaningContents Back of VCR Basic ConnectionsConnect VCR to TV Check contentsConnect VCR to power source Situate VCRClock and tuner channels will be set automatically Plug & Play SettingPerform Plug & Play setup What to do if Plug & Play setting failedSelect language Language SettingAccess Main Menu screen Access Initial Set screenSelect clock set Clock Setting10 EN 1PreparationsSelect host channel Setting clock semiautomaticallySelect D.S.T. mode Set Auto Clock to on12 EN Setting clock manuallyAutomatically Auto Channel Set Tuner SettingAccess Tuner Set screen Perform Auto Channel SetShuttle Plus # to Access Manual Channel Set screenAdd or skip desired channels Manual Channel SetConnect cable box to VCR Cable Box Control SettingSituate Controller Attach ControllerCable BOX SET Access Cable Box Set screenSelect cable box output channel Turn on cable boxIf the cable boxs channel does not change to Access Cable Box Brand Set screenEnter cable box brand Press OKDBS receiver Controller Your VCRsuggested Locations How to control the DBS receiver18 EN Connect DBS receiver to VCRSelect DBS receiver output channel Access Main Menu screen on VCRAccess DBS Receiver Set screen Turn on DBS receiverIf the DBS receiver’s Access DBS Receiver Brand Set screenChannel listed below for your brand, setting is complete Enter DBS Receiver’s brandStart playback BasicPlayback Load a cassetteChecking tape position Basic Playback Features22 EN Changing display informationActivate manual tracking Adjusting tracking conditionSelecting monitor sound Automatic operations afterLocating beginning Locating beginning of timerAccess distant code 24 ENStart recording Basic RecordingSelect recording channel Set tape speedWatching one program while Basic Recording Features26 EN Specifying recording lengthExit on-screen display Select S-VHS ET modeShowing on-screen display Display VCR status on TV screenRapidly Picture Search High-Speed Picture Search Special Effect Playback28 EN Locating particular sceneViewing slow motion picture Viewing still pictureSkipping unwanted portions Enter PlusCode number VCR Plus+ Timer ProgramingAccess PlusCode No. screen 30 ENCheck program date Engage timer recording standby modeTo use the VCR while it is in timer recording standby mode Input receiving channel numberVCR Plus+ guide channel matching Changing VCR Plus+32 EN SET, then press OK or Access Main Menu screen Input receiving channel numberInput guide channel number Guide Channel34 EN Express Timer ProgramingTo timer-record daily Monday-Friday or weekly serials Timer warning display Checking program settingsDisengage timer Access Program Check screenOther Useful functions for timer recording SettingsCancel or change program setting Reengage timer recording standby modeProgram Completed appears on the screen for about 38 ENConfirm overlapping programs Select program to modifySelect Function Useful Function SettingsAccess Function Set screen Change setting40 EN When this function is set to onWhen this function is set to OFF For Example By selecting either HI-FI L or HI-FI R Mode is used for recording on S-VHS tapesBy connecting other JVC’s AV Compulink components see AV Compulink connectors becomes possibleTo S-VIDEO AV Compu LinkTo AV Compu To AudioPress REC Link Set timer program on DBS receiverEngage Satellite Auto Recording standby mode 44 ENChild Lock Various connection for editing tapes Edit From Camcorder46 EN ConnectionSet Picture Control to Edit Select input mode on this VCRMake connections Select video input terminal48 EN Edit To Or From AnotherOperate TV TV Brand SettingTurn on the TV Set TV brand codeEnter cable box brand code Cable Box Brand Setting50 EN Turn on the cable boxOperate DBS receiver DBS Receiver Brand SettingTurn on the DBS receiver Enter DBS receiver brand codeChange code for VCR Changing Remote Control CodeCheck remote control code for VCR 52 ENPower 54 EN Timer RecordingMoisture Condensation Other ProblemsRecording Timer Recording56 EN PlaybackBlue Back List of terms3Cassette loading slot 8AUDIO/VIDEO input connectors  pg58 EN Front panelOn-screen display 7S Video OUT connector  pgRear panel1 60 EN How to use the RemoteUsable cassettes 62 EN HOW to Locate Your JVC Service CenterLimited Warranty HR-S29U

HR-S29U specifications

The JVC HR-S29U is a VCR model renowned for its advanced features and reliability in the world of analog video recording. As a product of JVC, a brand that has long been associated with innovation in video technology, the HR-S29U stands out in the realm of VHS players.

One of the key features of the JVC HR-S29U is its S-VHS capability, allowing for superior video quality compared to standard VHS. The S-VHS mode enhances the resolution and sharpness of the recorded images, making it an excellent choice for enthusiasts and those looking to preserve their home videos with the best possible clarity. The device also supports standard VHS, ensuring compatibility with a wide range of tapes.

Another notable characteristic of the HR-S29U is its 19-micron head technology. This feature significantly contributes to the VCR’s ability to capture and reproduce fine details, resulting in smoother playback and clearer images. The precision of the head design is particularly beneficial for those who are archiving older footage, as it helps minimize wear on the tapes and optimizes the viewing experience.

The JVC HR-S29U also includes a variety of convenient playback features. The index search function allows users to quickly locate specific scenes within a tape, which is especially useful for lengthy recordings. Additionally, the device supports rental tapes and features a copy protection mode, making it a versatile option for both personal and professional use.

Another important technology integrated into the HR-S29U is the Auto Tracking system. This function automatically adjusts the tracking for optimal playback performance, reducing the need for manual adjustments and ensuring a hassle-free experience. Moreover, the VCR comes equipped with various connection options, including composite and RF outputs, allowing for easy connections to televisions and audio systems.

In terms of design, the JVC HR-S29U is compact and user-friendly, with an intuitive interface that simplifies operation. Its reliable build quality and durability further make it a sought-after choice among users seeking to enjoy or digitize their VHS collections.

Overall, the JVC HR-S29U represents a significant blend of advanced features and user-friendly design, making it a notable entry in the world of video cassette recorders. With its S-VHS capabilities, innovative head technology, and convenient functionalities, it remains a valuable asset for anyone looking to preserve and enjoy their treasured video memories.
Top Page Image Contents