48 EN | EDITING (cont.) |
Edit To Or
From Another
VCR
Connection |
|
|
|
Ex. When using this VCR as the playback VCR | |||
| This VCR (for playback) | ||
|
|
| REMOTE |
|
|
| PAUSE/ IN OUT ANTENNA IN |
|
| CABLE | AV |
|
| COMPU | |
|
| BOX | |
| IN | OUT | AUDIO |
S | VHF/UHF | ||
V |
|
| TV OUT |
I |
|
| VIDEO |
D |
|
|
|
E |
|
|
|
O |
|
|
|
To S VIDEO |
| To AUDIO/ | |
OUT |
| VIDEO OUT | |
|
| Audio/video | |
(supplied) |
|
| |
|
|
| cable (not |
|
|
| supplied) |
To |
|
| To Audio/ |
Input |
|
| video Input |
Another VCR (for recording) |
You can use your VCR as the playback or recording VCR.
●Refer also to the other VCR’s instruction manual for
1connection and its operations.
Make connections
Connect an audio/video cable between the playback VCR’s audio/video output connectors and the recording VCR’s audio/video input connectors.
●When using this VCR as the recording VCR, connect this VCR’s audio/video input connectors to the audio/video output connectors on the other VCR.
If the playback VCR is monaural, connect the audio output connector on the playback VCR to the left audio input connector on this VCR.
2Load cassettes
Insert the playback cassette into the playback VCR and the cassette to be recorded on into the
3recording VCR.
Select input mode on recording VCR
Select the correct external input on the other VCR.
●On this VCR (when using this VCR as the recording VCR);
Select
Select
4Press the Number key "0 (AUX)" or CH
Select video input terminal on recording
VCR
When using this VCR as the recording VCR, follow the procedure described on pages 39 and 43.
When using S VIDEO terminal, set “REAR AUX INPUT” to
When using VIDEO terminal, set “REAR AUX
5INPUT” to “VIDEO”.
Select edit mode
Set the edit mode to “ON” for the VCRs if such a mode is equipped.
●On this VCR, set “PICTURE CONTROL” to
“EDIT” by following the procedure described
6on pages 39 and 40.
Start playback
Press PLAY ( 3 ) on the playback VCR.
NOTE:
If the playback VCR is equipped with a superimpose/ OSD disable feature then set it to “OFF” before starting
7playback ( pg. 39 and 40).
Start recording
Press REC ( ¶ ) on the recording VCR.
NOTE:
Be sure to select “AUTO” for “PICTURE CONTROL” (or
“NORM” when “VIDEO CALIBRATION” is set to “OFF”) after you finish dubbing the tapes ( pg. 39 and 40).