Initial Settings, Video Channel Set, Language Set

Initial Settings

Video Channel Set

Video channel (RF output channel) is the channel on which your TV receives picture and sound signals from the player through the RF cable.

Perform the following steps only if you have connected the player to your TV via the RF connection.

Turn on the player and the TV.

AConfirm the video channel

Select the vacant position 36 on your TV.

Insert a pre-recorded cassette into the player and press 4. You can see the picture on the screen.

NOTE:

If channel 36 is already occupied, or if the picture is distorted, or if you want to change the video channel, consult your nearest JVC dealer.

BStore channel on TV

Store the channel 36 on your TV.

●For details, refer to the instruction manual of your TV.

With AV connection

To view picture signals from the player, set your TV to its AV mode.

With RF connection

To view picture signals from the player, set your TV to the video channel.

ATTENTION:

If you connect the player to TV with RF connection ( 6), press 1to engage the player in the standby mode when you watch a TV programme. TV broadcast can not be received through AERIAL connector when the player is turned on.

Language Set

You can change the language setting manually as required.

Turn on the player and the TV, and set your TV to its AV mode or video channel.

A Access Main Menu screen

ABC OSD

Press MENU. Press w e to select the icon “ABC OSD”, then press OK.

BSelect language

Press w e to select the desired language, then press OK.

ENGLISH : English

РУССКИЙ : Russian

CReturn to normal screen

Press MENU.

— 7 —