JVC AV28CT1EI Video input, List, Press the 6 buttons or 5 buttons to choose an EXT terminal

EXT SETTING

To display the EXT SETTING menu:

1Press the abutton to display the MENU (main menu)

2Press the 6 buttons to choose EXT SETTING. Then press the abutton

■y (S-VIDEO input)

You can connect a device (such as an S-VHS VCR) to enjoy the high-quality picture of the S-VIDEO signal (Y/C signal).

Preparation:

•First read the device’s instruction manual and

“Further preparation” on page 31 to connect the device to the TV properly. Second, follow the device’s instruction manual to set the device so that it sends an S-VIDEO signal (Y/C signal) to the TV.

•Do not set y (S-VIDEO input) to an EXT terminal connected to a device which cannot output an S-VIDEO (Y/ C signal). If it is set wrongly, a picture cannot appear.

1Press the 6 buttons or 5 buttons to choose an EXT terminal

EXT-1

P

EXT-3

EXT-2

P EXT-4

TV

3Press the abutton to complete the setting

The menu disappears.

•The EXT-1 terminal does not support S-VIDEO signal (Y/C signal) and you cannot set y(S-VIDEO input) in the EXT-1 terminal.

•Setting y (S-VIDEO input) changes the head character from “E” to “S”. When an EXT terminal receives a normal video signal, “E1”, “E2”, “E3” or “E4” appears on the display. This changes to “S2”, “S3” or “S4” when it receives an S-VIDEO signal.

•Even a device which can output an S-VIDEO signal (Y/C signal) may output a regular video signal

(composite signal) depending on the device setting. If a picture cannot appear because the y (S-VIDEO input) setting has been made, read the device instruction manual carefully again to check for the device settings.

■LIST

You can store a name for each of the devices connected to each EXT terminal. Giving a name to an EXT terminal makes the EXT terminal number appear on the screen, together with its name.

1Press the 6 buttons or 5 buttons to choose an EXT terminal

EXT-1

P

EXT-3

EXT-2

P EXT-4

TV

2Press the blue button to display the name list (LIST)

2Press the yellow button and set the y (S-VIDEO input)

An y (S-VIDEO input) mark is displayed. You can view an S-VIDEO signal (Y/C signal) instead of the regular video signal (composite signal).

To cancel the y (S-VIDEO input) setting:

Press the yellow button and turn off the y (S-VIDEO input) mark.

The regular video signal (composite signal) pictures are resumed.

3Press the 6 buttons to choose a name. Then press the abutton

The LIST disappears and the name is assigned to the EXT terminal.

To erase a name assigned to the EXT terminal:

Choose a blank space.

4Press the abutton to complete the setting

The menu disappears.

•You cannot choose an EXT terminal name that is not on the name list (ID LIST).

21