Other menus

Downloading data to a VCR

You can send the latest programme numbers (PR) data to a VCR with the T-V LINK function.

You can only do this when a T-V LINK compatible VCR is connected to the EXT-2 terminal.

This only works when the T-V LINK menu is being displayed.

4Press the 6 buttons to choose FEATURES. Then press the abutton

The FEATURES menu appears.

1Turn on the VCR

2Press the abutton

The data transmission begins.

The T-V LINK menu disappears once the data transmission ends.

When the T-V LINK menu changes over to another menu:

The TV has finished its menu. This new menu is opperated from the VCR. See the VCR instruction manual for what to do next.

If “FEATURE NOT AVAILABLE” appears at the T-V

LINK menu, check the following three items. Then press the abutton to retry data transmission.

Has a T-V LINK compatible VCR been connected to the EXT-2 terminal?

Has the VCR power been turned on?

Does the SCART cable that connects the EXT-2 terminal to the T-V LINK compatible VCR have all its proper connections?

Using the DECODER (EXT-2) function

If you have a decoder connected to a T-V LINK compatible VCR, which in turn is connected to the EXT-2 terminal, use the DECODER (EXT-2) function to unscramble the scrambled TV channels.

1Turn on the decoder power

2Display the scrambled TV channel on the

TV

Even if the decoder is working, a scrambled picture appears.

3Press the abutton to display the MENU

The MENU (main menu) appears.

5Press the 6 buttons to choose DECODER (EXT-2) . Then press the 5 buttons to choose ON

An unscrambled picture appears.

To cancel the DECODER (EXT-2) function:

Press the 5 buttons to choose OFF.

6Press the abutton to complete the setting

The T-V LINK menu appears.

7Follow “Downloading data to a VCR” on page 30 to transmit the programme number (PR) data to the VCR

8If you have another TV channel you want to unscramble using a decoder, repeat steps 2 to 7.

If the DECODER (EXT-2) function has been set to “ON” but the TV channel cannot be unscrambled, check the following:

Has the decoder been connected to the VCR properly according to the VCR and decoder instruction manuals?

Has the decoder power been turned on?

Can the TV channel be unscrambled with a decoder?

Do you need to change the VCR settings in order to connect the decoder? Confirm that the VCR is set properly by rechecking the VCR Instruction manual.

30

Page 30
Image 30
JVC AV28CT1EK Other menus, Downloading data to a VCR, Using the Decoder EXT-2 function, Turn on the VCR Press the abutton