JVC AV28CT1EK Setting up your TV, Connecting the aerial and video cassette recorder VCR, Aerial

Setting up your TV

■Connecting the aerial and video cassette recorder (VCR)

If you are connecting a VCR, follow A → B → C in the diagram opposite.

If you are not connecting a VCR, follow 1.

Aerial

75-ohm coaxial

• For more details, see the manuals that came with the

equipment you want to connect.

Back of the TV

cable

• The connecting cables are not provided.

• You can watch a video using the VCR without doing C.

For details, see your VCR instruction manual.

• To connect more equipment, please see “Further

preparation” on page 31.

• If you connect a decoder to a T-V LINK compatible VCR,

set the DECODER (EXT-2) function to ON. For details, see

“Using the DECODER (EXT-2) function” on page 30.

Otherwise, you will not be able to watch scrambled

channels.

To use the T-V LINK functions, you must have a T-V LINK compatible VCR connected by a SCART cable Cto the EXT- 2 terminal on the TV. For details about T-V LINK functions, see “T-V LINK functions” on page 7.

EXT-2	EXT-3
S	S
EXT-1

	75-ohm
21-pin SCART	coaxial
cable	cable

VCR	To aerial
	input

To aerial

output

AV IN/OUT

terminal

■Connecting the power cord to the mains outlet

Caution:

•Use only the power source specified on the unit (AC 220 – 240 V, 50 Hz).

■Putting batteries into the remote control

Use two AAA/R03 dry cell batteries.

Insert the batteries holding the - end, making sure the + and

-terminals are correctly lined up.

To open the battery compartment, slide the door downwards and lift off. Replace the door by sliding it upwards until it fastens into place.

• Follow the warnings printed on the batteries.

• Battery life is about six months to one year, depending on how much you use the remote control.

•If the remote control does not work properly, fit new batteries.

•The batteries we supply are only for setting up and testing your TV. Please replace them as soon as you need to.

4 • Always use good-quality batteries.