JVC AV28CT1EI, AV28CT1EK Changing the volume, Watching images from External equipment

Using your TV–the basics

2Press the 5and 6buttons to choose a programme number (PR). Then press the abutton

•For programme numbers (PR) where you have the CHILD LOCK function set, the n (CHILD LOCK) mark appears next to the programme number (PR) in the PR LIST.

•You cannot use the 6 buttons to choose a programme number (PR) which has the CHILD LOCK set.

•Even if you try to choose a programme number (PR) with the CHILD LOCK set, the n(CHILD LOCK) mark will appear, and you cannot watch the TV channel. To watch the TV channel, see “CHILD LOCK” on page 23.

•If you do not have a clear picture or no colour appears, change the colour system manually. See “COLOUR SYSTEM” on page 18.

■Changing the volume

Press the 5 buttons to change the volume.

The volume indicator appears, and the volume changes, as you press the qbuttons.

■Watching images from

external equipment

Choose the EXT terminal that the external equipment has been connected to.

Use the obutton:

Press the obutton to choose an EXT terminal. Pressing the obutton changes the choice as follows:

Use the 6buttons:

Press the 6buttons to choose an EXT terminal

Use the PR LIST:

1Press the h(information) button to display the PR LIST

2Press the 5and 6buttons to choose an EXT terminal. Then press the abutton

•The EXT terminals are listed after programme number PR 99.

•You can choose two types of video input signal:

S-VIDEO (Y/C signal) and regular video (composite signal). For details, see “y (S-VIDEO input)” on page 21.

•If you do not have a clear picture or no colour appears, change the colour system manually. See “COLOUR SYSTEM” on page 18.

•If you choose an EXT terminal with no input signal, the EXT terminal number becomes fixed on the screen.

•This TV set can automatically change over the input according to a special signal from an external device. (The EXT-4 terminal does not support it.)

To use the programme number PR 0 (AV):

When the TV and VCR are connected only by the aerial cable, choosing the programme number PR 0 (AV) allows you to view images from the VCR. Set the VCR RF channel to programme number PR 0 (AV) manually. For details, see “EDIT/MANUAL” on page 26.

Pressing the obutton changes the choice as follows:

TV mode EXT modes

TV mode

Programme

numbers

PR 1 to PR 99

EXT modes

EXT-1	EXT-2
EXT-4	EXT-3

Programme	PR 0
numbers
PR 1 to PR 99

EXT-1	EXT-2
EXT-4	EXT-3

•The VCR sends its playback image along the aerial cable as an RF (radio frequency) signal.

•Also see your VCR instruction manual.

To return to a TV channel:

Press the bbutton, the 6buttons or the number buttons.

9