Picture features
To display the PICTURE FEATURES menu:
1 Press the a button to display MENU (main menu)
2Press the 6buttons to choose PICTURE FEATURES, and press the abutton
■AUTO VNR
VNR Stands for “video noise reduction”.
The AUTO VNR function reduces any “noise” (interference or snowing) in the current picture. The function also adjusts the optimum Sharpness of the picture (SHARP).
1 Press the 6 buttons to choose AUTO
VNR
2Press the 5 buttons to choose AUTO
MIN:
The AUTO VNR function is cancelled. When you set the mode to AUTO but feel that the sharpness of the original picture has not been reproduced fully, change the mode to MIN. However, any noise remaining in the original picture may be emphasized.
MAX:
This mode always reduces any noise as much as possible, irrespective of state of the picture. When you set the mode to AUTO but still notice some noise, change the mode to MAX. However, this may reduce the sharpness of the picture.
3Press the abutton to complete the setting
The menu disappears.
■COLOUR SYSTEM
The colour system is chosen automatically. However, if the picture is not clear or no colour appears, choose the colour system manually.
1Press the 6buttons to choose COLOUR SYSTEM. Then press the abutton
The
2Press the 5buttons to choose the appropriate colour system
PAL:
PAL system
NTSC 3.58:
NTSC 3.58 MHz system
NTSC 4.43:
NTSC 4.43 MHz system
AUTO:
This function detects a colour system from the input signal. You can only use this when you are viewing a picture from programme number PR 0 (AV), or an EXT terminal.
3Press the abutton to complete the setting
The menu disappears.
•The AUTO function may not work properly if you have poor signal quality. If the picture is abnormal in the AUTO function, choose another colour system manually.
•You cannot choose NTSC 3.58 or NTSC 4.43 for programme numbers PR 0 (AV) to PR 99.
18
