JVC HR-S5971E, HR-S5970E, HR-S5972E specifications Clock Set, Tuner Set

Clock Set	C Select language
	Press RT to place the pointer next to the desired language.

Turn on the recorder and the TV, and set your TV to its AV mode or video channel.

AAccess Main Menu screen, then Initial Set screen

Press MENU. Press RT to place the pointer next to “INITIAL

SET”, then press OK or .

BAccess Clock Set screen

Press RT to place the pointer next to “CLOCK SET”, then press

OK or .

C Set time, date and year

Press RT until the desired time appears,

then press OK or . Set the date and year in the same way.

●Holding RT changes the time in

30-minute intervals, or changes the date

in 15-day intervals.

DSet Just Clock

Set to “ON” or “OFF” by pressing RT, then press OK or .

Just Clock

D Perform Auto Channel Set

Press OK twice. When Auto Channel Set is completed, “SCAN COMPLETED” is displayed on the screen for about 5 seconds, then the Confirmation screen appears.

● When you select a country in Central or

Eastern Europe for country setting, station names (ID) are not stored automatically. Change station names manually. ( 14)

EReturn to normal screen

Press MENU.

NOTES:

●Depending on reception conditions, the stations may not be stored in order, and the station names may not be stored correctly.

●If no sound accompanies the picture or the audio sounds unnatural on some channels, select the appropriate TV system for those channels.

●To delete stations with poor reception condition, refer to “Deleting a channel” ( 14).

The Just Clock function provides accurate time keeping through			Manual Channel Set
automatic adjustments at regular intervals, by reading data from a
			Store channels that were not stored during Auto Set Up or Auto
PDC signal. Normally, set “JUST CLOCK” to “ON”.
NOTES:			Channel Set.
			A Access Main Menu screen, then Confirmation screen
● Just Clock may not function properly depending on the
	reception condition.		Press MENU. Press RT to place the pointer next to “MANUAL
● When you select a country in Central or Eastern Europe for
			CH SET”, then press OK or			.
	country setting, you cannot use Just Clock. Skip steps 4 – 5.
			B Select position
● Just Clock is not effective when …
	… the recorder’s power is on.		Press RT		until an open
	… the recorder is in the Timer mode.		channel position begins blinking, then
	… a difference of more than 3 minutes exists beween the built-		press OK. The Manual Channel Set
	in clock’s time and the actual time.		screen appears.
	… the recorder is in the Power Save mode ( 12).		C Select band
	… “L-2 SELECT” is set to “SAT” ( 10).
E Set source channel position			Press RT to select CH (regular) or CC
			(cable), then press		.
The recorder is preset to receive clock setting and adjustment data
			D Input channel
from channel position 1. Press RT to set the channel position to
the number representing the station transmitting clock setting			Press the number keys to input the
data, then press OK or		.	channel number you want to store. Input
F Start clock			“0” before any single number entries.
			● To input the registered station name
Press MENU.
			(ID), press		until “– – – –” begins
ATTENTION:			blinking, then press RT.
			● When “L-2 SELECT” is set to “A/V” or “SAT”, the “DECODER”
If the AC was disconnected from the recorder and the recorder’s			setting cannot be changed. ( 10)
memory backup has expired, the recorder will automatically			● If you have selected a country in Central
perform Auto Clock Set when the power is restored.			or Eastern Europe for country setting,
			“TV SYSTEM” setting appears instead of
Tuner Set			“DECODER” setting. When you can see
			the picture but can hear no audio, select
Perform the following steps only if the tuner has not been set			appropriate TV system.
			Press	until D/K or B/G blinks. Then
correctly by Auto Set Up, or if you have moved to a different area,
			press RT to select D/K or B/G.
or if a new station starts broadcasting in your area.
The recorder needs to memorise all necessary stations in channel			Major Countries/Areas				TV System
positions in order to record TV programmes. Auto Channel Set			Austria, Denmark, Finland, Holland, Italy,
automatically assigns all receivable stations in your area.			Norway, Spain, Switzerland, Sweden,				B/G
Auto Channel Set			Germany, Egypt, Western Europe
			China, Mongolia, Rumania, Bulgaria, Czech
A Access Main Menu screen, then Auto Channel Set screen			Rep., Slovakia, Hungary, Poland, Russia,				D/K
			Central or Eastern Europe
Press MENU. Press RT to place the pointer next to “AUTO CH
			E Store new channel
SET”, then press OK or		.
B Select your country			Press OK.
Press RT to place the pointer next to your country, then press OK			● Repeat steps 2 – 5 as necessary.
			F Return to normal screen
or	.

Press MENU.

— 13 —