JVC HR-S5972E, HR-S5970E, HR-S5971E specifications Language Set, Basic Playback

With AV connection

Press PR – until the display panel shows “1 – –” (or “2 – –”). Now the video channel is set to off. Then press OK.

●To view picture signals from the recorder, set your TV to its AV mode.

ECheck results

If both Auto Channel Set and Clock Set have been performed successfully, the correct current time is displayed.

Turn on the TV and select its video

channel or AV mode. Then make sure that all necessary stations have been stored in the recorder’s memory by using the PR button(s).

If Auto Channel Set has succeeded but

Clock Set has not, “1” is displayed. A Turn on the TV and select its video channel or AV mode. Then make sure that

all necessary stations have been stored in the recorder’s memory by using the PR button(s).

BPerform “Clock Set” ( 13).

If both Auto Channel Set and Clock Set have failed, “– –:– –” is displayed.

Make sure the cables are connected properly. Turn off the recorder once, then

turn the recorder back on again. The Country Set screen appears on the screen. Perform “Auto Set Up” again.

Language Set

You can change the language setting manually as required.

A Access Main Menu screen, then Auto

Channel Set screen

Press MENU. Press RT to place the		OUTPUT/INPUT SET
pointer next to “AUTO CH SET”, then press		CLOCK SET
OK or	.

B Select your country

Press RT to place the pointer next to your

country, then press OK or .

CSelect language

Press RT to place the pointer next to the desired language.

●You do not have to press OK; pressing OK starts Auto Channel Set.

DReturn to normal screen

Press MENU.

Playback

Basic Playback

Turn on the TV and select the video channel or AV mode.

ALoad a cassette

Make sure the window side is up, the rear label side is facing you and the arrow on the front of the cassette is pointing towards the recorder.

●Do not apply too much pressure when inserting.

●The recorder turns on, and the counter is reset, automatically.

●If the cassette’s record safety tab has been removed, playback begins automatically.

BStart playback

Press 4.

The S-VHS indicator lights up when you play back a tape recorded in S-VHS mode or in S-VHS ET mode ( 8).

During playback

Stop playback

Press 8 on the remote OR Press 0 on the recorder. control.

Pause playback and view still picture

Press 9.

●Press 4 to resume normal playback.

●If there is vertical jitter, press PR R/T on the remote control or PR+/– on the recorder to correct the picture.

Pause and Frame-by-Frame playback

Press 9 to pause, then press or (or 9) repeatedly.

●Press 4 to resume normal playback.

Picture Search

Press 3 or 5. Press 3 or 5 again to perform high- speed search.

●Each time you press 3 or 5, the search speed changes between low-speed and high-speed.

●Press 4 to resume normal playback.

Variable Speed Search (including slow-motion)

Press or repeatedly.

●Press 4 to resume normal playback.

●Each time you press or , the playback speed changes. To decrease the speed during picture search, press the opposite direction button repeatedly.

●During still picture, press and hold to start forward (or

to start reverse) slow motion playback. When you release the button, still picture resumes. During still picture, holding 9 for more than 2 seconds also starts forward slow motion playback. If you press 9 again, still picture resumes.

●During slow motion playback, some noise may appear on the TV screen. Press PR R/T on the remote control or PR+/– on the recorder to eliminate the noise.

Reverse					Forward
Reverse		Reverse	Slow		Forward
	Reverse	slow		Normal
search			motion		search
	play	motion		play
3 steps			1 step		4 steps
		1 step

— 5 —