JVC HR-S8700EU specifications 66 EN, For Example

Page 66

66 EN

 

 

SUBSIDIARY SETTINGS (cont.)

 

 

 

* The default setting is bold in the table below.

 

 

 

 

 

8 AUTO SP]LP TIMER

 

When this function is set to “ON”, the recorder automatically switches to LP

ON

 

mode to allow complete recording if there is not enough tape to record the

OFF

 

entire programme while timer-recording in SP mode.

 

 

For Example . . .

 

 

 

 

Recording a programme of 210 minutes in length onto a 180-minute tape

 

 

Approximately 150 minutes

Approximately 60 minutes

 

 

 

 

 

 

 

SP mode

LP mode

 

 

 

Total 210

minutes

 

 

 

Make sure you set this function to “ON”, before the timer-recording starts.

 

 

NOTES:

 

 

 

 

● If you have programmed the recorder to timer-record 2 or more programmes, the

 

 

second programme and those thereafter may not fit on the tape if you set “AUTO

 

 

SP]LP TIMER” to “ON”. In this case, make sure the mode is not engaged, then set

 

 

the tape speed manually during timer programming.

 

 

● In order to ensure that the recording fits on the tape, this feature may leave a slight

 

 

non-recorded section at the end of the tape.

 

 

● There may be some noise and sound disturbance at the point on the tape where the

 

 

recorder switches from SP to LP mode.

 

 

● The Auto SP]LP Timer feature is not available during ITR (Instant Timer Recording),

 

 

and the feature will not work properly with any tapes longer than E-180, or with

 

 

some tapes of shorter lengths.

 

 

 

 

● If you perform timer recording with both VPS/PDC and the Auto SP]LP Timer

 

 

activated, and the programme goes beyond its originally scheduled length, there

 

 

may be times when the programme cannot be recorded in its entirety.

 

 

 

 

 

8 DIGITAL 3R

 

When this function is set to “ON”, the Digital 3R picture system applies edge

ON

 

correction to the luminance signal to enhance detail.

OFF

 

NOTES:

 

 

 

 

 

 

 

 

● Normally it is recommended to keep “DIGITAL 3R” set to “ON”.

 

 

● Depending on the type of tape being used, picture quality may be better with

 

 

“DIGITAL 3R” set to “OFF”.

 

 

 

 

● If you use the recorder as the source player for editing, be sure to set “DIGITAL 3R”

 

 

to “OFF” before starting.

 

 

 

 

 

 

 

8 POWER SAVE

 

When this function is set to “ON”, you can reduce the power consumption

ON

 

while the recorder is turned off.

OFF

 

NOTES:

 

 

 

 

 

 

 

 

● During Power Save mode ...

 

 

 

 

... the front display panel will be turned off.

 

 

... the Just Clock function ( pg. 76) does not work.

 

 

... the picture may be distorted momentarily when you turn on/off the recorder.

 

 

● Power Save does not work when ...

 

 

... the recorder is in the Timer mode.

 

 

... the recorder’s power is turned off after timer-recording or Instant Timer

 

 

Recording.

 

 

 

 

... the Automatic Satellite Programme Recording mode is engaged ( pg. 36).

 

 

... “L-2 SELECT” is set to “DECODER” or “SAT” ( pg. 51).

 

 

 

 

 

8 VIDEO STABILIZER

 

When this function is set to “ON”, you can automatically correct vertical

ON

 

vibration in the picture when playing back unstable recordings made on

OFF

 

another recorder.

 

 

 

 

NOTES:

 

 

 

 

● When you finish viewing a tape, be sure to set this function to “OFF”.

 

 

● Regardless of the setting, this function has no effect during recording and during

 

 

special effects playback.

 

 

 

 

● The on-screen display may jitter vertically when this function is set to “ON”.

 

 

● To watch recordings with close-caption, set this function to “OFF”.

 

 

● Video Stabilizer and Digital TBC/NR cannot be used at the same time. If you activate

 

 

Digital TBC/NR when “VIDEO STABILIZER” is set to “ON”, Video Stabilizer will be

 

 

automatically turned “OFF”.

 

 

 

 

 

 

 

Page 65 Page 67
Image 66
Page 65 Page 67
Contents Video Cassette Recorder Safety Precautions Moisture Condensation Front View Rear View Front Display Panel ON-SCREEN Display Remote Control How To Use Remote Control LCDSituate the recorder Check the contents10 EN Connect the recorder to TV8To connect to a TV with S-VIDEO/AUDIO in connectors Video ConnectionTurn on the recorder Auto Set Up12 EN Select your countryPress rt to select your language code Perform Auto Set UpSelect the language Press rt to select Auto and press OK or eSet the video channel Perform Preset Download14 EN Press rt to select CH - and press OK or eLanguage for the on-screen display Just ClockLanguage Access the Main Menu screenAccess the Country Set screen 16 ENAttach the Satellite Controller Installing Satellite ControllerSituate the Satellite Controller Make connectionsSetting satellite receivers brand and channel 18 ENTV Auto Power On NexTView LinkVCR Auto Standby Direct Rec Basic Playback 20 ENHigh-Speed Turbo Search Variable Speed SearchSlow Motion Pause during playbackIndex Search 22 ENSkip Search Activate Index SearchRepeat Playback Next Function MemoryDigital TBC/NR Manual Tracking24 EN Instant Timer Recording ITR Tape Remaining TimeRetake Engage the Record-Pause mode26 EN Locate the start pointSuper VHS ET S-VHS ET Engage the S-VHS ET modeAdjust the audio recording level Audio Recording Level ControlReceiving Stereo and Bilingual Programmes ReceivedPlayback RecordingAccess the Showview Program screen Access the Showview displayAccess the Showview screen 30 ENSatellite Receiver Users Set the VPS/PDC modeEngage the recorder’s timer mode Guide Program Number SetExpress Timer Programming 32 ENEnter the channel position To Timer-Record Weekly Or Daily SerialsVPS/PDC Recording Press PR+34 EN Select the programme to modify Cancel or change programme settingConfirm the overlapping programmes Overlapping programmes blink on the TV screenProgramme Recording Select the L-2 Select modeRecording mode 36 ENSet the remote control code Remote A/B Code SwitchingRemove the power supply Re-supply the powerSet the TV brand code TV Multi-Brand Remote Control38 EN Operate the TVSatellite Receiver Multi-Brand Remote Control Set the satellite receiver brand codeOperate the satellite receiver Navigation Playback Navigation40 EN Check MemoryCheck the memory Turn Off NavigationVideo Navigation Title Screen Turn off Navigation42 EN Access the Find Blank Space screenEdit Title Find Blank SpaceEntering Character Access the Edit Title screenEdit Tape Title Select the tape titleSelect the programme 44 ENChoice of Category Enter the programme titleDelete the tape data Delete Tape DataDelete Programme Data Delete the programme data46 EN Access the Find Title screenFind Title Sort By Tape NumberSort By Date Access the Tape No. screenAccess the Date screen Select the programmeSort By Category Access the Category screen48 EN Category you want to watchEdit From a Camcorder Set the recorder’s input modeSet the edit mode Start the camcorderOutput/Input Set Select and L-2 Input Setting Decoder connectorAnother Video Recorder 52 ENPlayer Audio Dubbing 54 ENEnd Audio Dubbing Engage the Audio Dubbing modeStart dubbing Press AUX number key 0 and/or PR to select F-1 or S-1Insert Editing 56 ENLocate the end point Engage the Insert Editing modeAV Insert Editing Start EditingPause Synchro Editing 58 ENStart Synchro Editing Press Synchro 7/79Access the Jlip ID No. Set screen Set the Jlip ID numberJlip ID Number Connecting To a Satellite Receiver Simple ConnectionsPerfect Connections Connect the decoder Select the input mode62 EN Set the tunerConnecting/Using a Stereo System Make connectionsSelect the mode Mode SetAccess the Mode Set screen Select the mode settingWhen this function is set to ON, the timer is You can set the B.E.S.T. Biconditional Equalised SignalThis feature helps you to adjust the playback picture Off, and automatically disengaged when the recorder is66 EN For ExampleAbout Ntsc Playback 68 EN Access the Auto Channel Set screenTuner Set Auto Channel SetPerform Auto Channel Set View the Confirmation screenPress OK twice 70 EN Manual Channel SetWhen Receiving a Scrambled Broadcast Delete a Channel72 EN Set Stations aSet Stations B TV Station And ID List Station NameVideo Channel Set Access the Video Channel Set modeExit the Video Channel Set mode 74 ENGuide Program Number Showview System SetupGuide Program Number Set Enter the Guide Program numberAccess the Clock Set screen Clock Set76 EN Set the source channel position for clock data Set the date and timeSet Just Clock Start the clock operationTroubleshooting 78 ENRecording Other Problems 80 ENPlayback 82 EN Timer Warning Display Tuner Set Preset DownloadSynchro Editing Tape Position Indicator Tape Remaining Time Manual Channel Set Manual Tracking Mode SetInternational telephone Language code Country code
Related manuals
Manual 84 pages 21.13 Kb

HR-S8700EU specifications

The JVC HR-S8700EU is a notable VHS player and recorder that continues to attract attention for its advanced features and performance. This model has made a significant mark in home entertainment systems, particularly for those who appreciate classic VHS tapes.

One of the standout features of the HR-S8700EU is its high-quality video playback and recording capability. This model utilizes JVC's sophisticated Super VHS (S-VHS) technology, which provides a significant enhancement in image quality compared to standard VHS. The S-VHS format offers improved resolution and clarity, allowing users to enjoy a cinematic experience within the comfort of their homes.

The HR-S8700EU is equipped with a 4-head system, which facilitates both high-quality video playback and recording. This technology ensures that tapes are played back with minimal distortion and greater detail, presenting a smoother and clearer picture. The machine also boasts a feature called S-VHS ET (Enhanced Technique), which allows standard VHS tapes to achieve near-S-VHS quality when played on the HR-S8700EU.

Another significant aspect of the HR-S8700EU is its range of connectivity options. With the inclusion of SCART, RCA, and S-Video outputs, users can easily connect the recorder to a variety of television sets and other devices. This versatility is particularly beneficial for those looking to maintain an extensive VHS library while integrating contemporary audio-visual components.

The user-friendly interface and a comprehensive set of programmable features make the HR-S8700EU a highly practical choice for home use. The built-in timer allows for scheduled recordings, making it easy to capture favorite shows without the need for manual operation. Additionally, the on-screen display provides clear navigation through menus, simplifying the recording and playback processes.

Durability and reliability are also hallmarks of the JVC HR-S8700EU. Designed for longevity, this model features robust construction that ensures it can withstand regular use while maintaining consistent performance. As a testament to its popularity, many users still seek out the HR-S8700EU for its blend of classic technology and dependable functionality.

In summary, the JVC HR-S8700EU is a versatile and enduring choice for VHS enthusiasts, featuring high-quality S-VHS playback, a 4-head system, multiple connectivity options, and user-friendly programming capabilities. With its reliable performance and exceptional video quality, it stands out as a valuable addition to any classic media collection.
Top Page Image Contents