JVC HR-J387EM, HR-J381EM, LPT0592-001C Other Functions, Checking tape position, Function settings

[PROG] : EXIT

[ / ]

PR START STOP CH DATE

1 8:00 10:00 3 24.04

2 10:00 10:45 2 25.04

3 11:30 13:00 1 25.04

4 9:00 10:00 92 DAILY

5

6

7

8

– Timer Recording –

Program overlap warning display

If “PROGRAM OVERLAPPED” appears, you have another program overlapping the program you have just made. The Program Check screen appears and conflicting programs will start blinking.

	PR START		STOP	CH	DATE
PROGRAM OVERLAPPED	1	8:00	10:00	3	24.04
	2	10:00	10:45	2	25.04
	3	11:30	13:00	1	25.04
	4	9:00	10:00	92	DAILY
	5
	6
	7
	8
	[	/ ]	[PROG] : EXIT

Example:

Program 1 (you have just made) and Program 4 overlap each other.

A Select program to modify

Press rt, then press e.

● You can only select one of the overlapping programs.

● If you do not mind this overlap, press

PROG to finish the timer program setting. The program starting earlier or

program with the lower program number will be recorded.

B Cancel or change program setting		– P1 –
To cancel a program, press & when the	START	STOP
	9:00	10:00
Program screen you do not want is shown.		SP
To change a program, press the	DATE	TV PROG
appropriate button: START+/–, STOP+/–,	25.04	92
DATE+/–,PR+/–, and/or SP/LP/EP (p)	[ ] : DELETE	[+/–]
	[PROG] : EXIT
when the Program screen on which you

want to make changes is shown, then press OK.

●If the overlap is not yet solved, the conflicting programs will be shown on the Program check screen. Repeat the above steps again.

Other Functions

Checking tape position

When you change the recorder operation
mode from the stop mode to fast forward
or rewind mode, or when you perform an
Index Search or Instant Review, the tape	0	+ +	+		+
position indicator appears.
The position of “q” in relation to “0”				1:23:45

(beginning) or “+” (end) shows you where you are on the tape.

● Set “O.S.D.” to “ON”.

Changing display information

Each time you press – –:––, the display panel shows the channel number and the clock time alternatively. ● You can change display in the stop, recording or

recording pause mode, or during rewind/fast- forward high-speed search.

● When “O.S.D.” is set to “ON” and – –:– – on the

remote control is pressed, time counter will appear on the TV screen. To reset the time counter, press 0000 on the remote control.

Function settings

You can use the other useful function settings on the Function Set screen.

●Turn on the recorder and the TV, and set your TV to its AV mode or video channel.

AAccess Main Menu screen, then

Function Set screen

Press MENU on the remote control. Press rtto place the pointer next to “FUNCTION SET”, then press OK or e.

MAIN MENU

FUNCTION SET

TUNER SET

INITIAL SET

[ /] [MENU] : EXIT

BSelect Function

Press rtto place the pointer next to the function you want to set.

B.E.S.T.	FUNCTION	ON
PICTURE CONTROL		AUTO
PAL/MESECAM		AUTO
NTSC	NTSC3.58
AUTO TIMER		OFF
O.S.D.		ON
AUTO SP	LP TIMER	OFF

[ /] [MENU] : EXIT

CChange setting

Press OK or e. The default setting is bold in the following table. Press MENU to return to normal screen.