JVC HR-J430U manual Tape Position Indicator, Next-Function Memory

POWER

REW	FF
2	2
q	5/8 6
	PLAY

23

Tape Position Indicator

The Tape position indicator appears
on screen when, from the stop
mode, you press FF, REW or perform
an Index Search or Instant ReView.			+	+	+
The position of "	" in relation to "B"	B					E
(Beginning) or "E" (End) shows you
where you are on the tape.			COUNT			0:33:27
** SUPERIMPOSE must be set to

ON, or the indicator will not appear (☞ pg. 20).

			Next-Function Memory
			The Next Function Memory “tells” the VCR what to do after
			rewinding.
			POWER
			* Before continuing, ensure that the VCR is in stop mode.
			a– For Automatic Start Of Playback After Tape Rewind . . .
			. . . press REW, then press PLAY within 2 seconds.
1	2	3	b– For Automatic Power Off After Tape Rewind . . .
			. . . press REW, then press POWER within 2 seconds.
4	5	6	c– For Automatic Timer Standby After Tape Rewind . . .
7	8	9	. . . press REW, then press TIMER within 2 seconds.

0 TIMER

FF

REW