Select Program Number, SET Program Information

TIMERRECORDING(cont.)

q 5/8 6

MENU	CH

	1		2	3
NUMBER	4		5	6
NUMBER					NUMBER "9"
	7		8	9	NUMBER "9"
	7		8	9
			0		TIMER
			0
	NUMBER	"8"			CH
	NUMBER

SHUTTLE PLUS

SELECT PROGRAM

NUMBER

Press the appropriate NUMBER keys or CH5°or SHUTTLE PLUS 5°to select a vacant program number, then press OK. The first time you do this, all numbers will be vacant, so just press OK when the screen appears.

SET PROGRAM

INFORMATION

Press the appropriate NUMBER keys to set the date, start/stop time and channel number. Press CH5° or SHUTTLE PLUS 5° to set AM/PM and tape speed.

Then press OK after AM/PM, channel number and tape speed settings.

●Any information comprised of 1 digit (except the channel number) should have a "0" entered before it.

●It is possible to set all information using the CH5° or SHUTTLE PLUS 5° buttons. (In this case, press OK after each setting.)

**You can record selected programs at the same time every weekday, or once a week. Before entering the month, press NUMBER key “8” (DAILY) or “9” (WEEKLY). Either "DAILY" or "WEEKLY" appears. Press again and "DAILY" or "WEEKLY" disappears.

MAKE CORRECTIONS

To change any of the settings, press OK or SHUTTLE PLUS ª£ until the item you want to change begins blinking. Then set as in step 4.

RETURN TO NORMAL SCREEN

Press MENU as many times as necessary.

●Press just once to access the Auto Timer screen (☞ pg. 28).

ENGAGE TIMER MODE

Press TIMER. The VCR turns off automatically.

EXAMPLE

If you program the VCR to timer record a show on September 6 on channel 40 from 12:00 noon to 1:00 PM in SP mode, the screen will look like this:

PROGRAM 1

DATE	9/ 6 SUN
START	12:00 PM
STOP	1:00 PM
CHANNEL	40 SP

PRESS NUMBER KEY(0-9) OR (5,°), THEN (OK)

PRESS (MENU) TO END

NOTES:

●To disengage the timer before recording starts, press TIMER again. Pressing once more re-engages it.

●In case of a power failure after programming, the VCR’s memory backup keeps your selections for 10 minutes.

●If you select "PROGRAM SET" without having set the date and time, an error message appears. Follow its instructions.

●If you enter a start time that has already passed, ERROR appears on the screen and flashes.

●Programs that start after midnight must have the next day’s date.

●After timer recording is completed, the VCR’s power goes off automatically.

●You can program the timer while a regular recording is in progress; the on-screen menu will not be recorded.

●If the end of tape is reached during timer recording, the cassette is automatically ejected.

●When timer-recording cable channels received through a Cable Box, be sure to keep the Cable Box set to ON.