JVC HR-VP656U manual Unplug Vcrs Power, SET Remote Control, Code, Plug in Power Cord

Page 51

EN51

A/B

POWER

NUMBER "1"

1

2

3 NUMBER "2"

 

 

2

 

 

 

 

4

5

6

 

7

8

9

 

 

0

TIMER

 

 

4

1

STOP

Control Two JVC VCRs

The remote control is capable of controlling two JVC VCRs independently; one set to respond to your remote control's A code control signals and another set to respond to B code control signals. The remote control is preset to send A code signals because your VCR is initially set to respond to A code signals. You can easily modify your VCR to respond to B code signals.

 

 

UNPLUG VCR'S POWER

1

 

CORD

 

Unplug from the AC outlet.

 

 

SET REMOTE CONTROL

2

 

CODE

 

While holding down A/B on the remote control, press

the NUMBER key "2" and then press STOP.

3

 

PLUG IN POWER CORD

 

Plug back in to the AC outlet.

4

 

TURN VCR POWER ON

 

Press POWER on the remote.

Child Lock

This feature allows you to prevent the operation of the VCR.

The VCR will now respond only to B-code commands.

To set the VCR back to respond to A code signals, repeat the same procedure as shown above except pressing NUMBER key "1" instead of "2" in step 2.

You can control two VCRs with the same remote control by switching the remote's code between A and B (☞ Step 2).

1

2

TURN VCR POWER ON

Press POWER.

ENGAGE CHILD LOCK

Press and hold POWER on the remote control until the Child Lock indicator ("—") appears on the front display panel.

●Power turns OFF and the VCR cannot be turned on from the POWER button on the front panel.

●To cancel Child Lock, press and hold POWER on the remote until the VCR turns on. During timer record- ing, pressing TIMER also cancels Child Lock.

NOTES:

●When Child Lock is engaged, make sure to keep the remote control out of the reach of children.

●Timer recording of programs that were previously set can be performed while the Child Lock is engaged. The feature remains in effect after the recording is finished.

Page 50 Page 52
Image 51
Page 50 Page 52
Contents HR-VP656U Do not place the VCR Dear CustomerGrounding or Polarization Power SourcesPower Cord Protection Power LinesReplacement Parts AccessoriesDamage Requiring Service CleaningContents Matching Transformer not supplied EN Installing Your NEW VCRBasic Connections Back of VCRConnect VCR to TV Check ContentsConnect VCR to Power Source Situate VCRAuto Clock Set/Auto Tuner Set Plug & Play SetupPlug & Play EN I Nitial Sett IngsInformation Language Shuttle PLUS%Þ, then Access Clock SETClock PreparationSemi-Auto Select D.S.T. ModeSET Auto Clock to on Select Host ChannelSET Date Select Time ZoneReturn to Normal Screen SET TimeSET Access Main Menu ScreenAccess Tuner SET Screen TunerAdd Or Delete a Channel Access Manual Channel SET ScreenADD or Skip Desired ChannelConnect Cable BOX to VCR Cable Box ControlSituate Controller Attach ControllerOutput Channel Access Cable BOX SETTurn on Cable BOX Select Cable BOXAccess Cable BOX Brand SET Screen Initial SettingsEnter Cable BOX Brand DBS Receiver Control Connect DBS Receiver To VCRDBS receiver Turn on DBS Receiver Select DBS ReceiverSet DBS Receiver Output Channel & DBS Receiver Brand Access DBS Receiver Start Playback Simple PlaybackLoad a Cassette Find Program Start PointSimple Recording Search Playback FeaturesActivate FRAME-BY Frame PlaybackActivate HIGH-SPEED Search Access Distant CodeEngage Manual Tracking Mode Adjust Manual TrackingCH 5 or Shuttle Plus Layback and Recording FeaturesActivate Video Stabilizer Video StabilizerStop Repeat Start RepeatSuperimpose ModeSelect The Soundtrack Access Function SETSET Mode Select Audio MonitorMovie Advance Access Skip MenuPerform Movie AdvanceAV Compu Link Playback ExampleOK or Shuttle Plus % Calibration Mode Active Video CalibrationPress CH 5 or Shuttle Recording PlaybackRecord One Program While Watching Another Recording FeaturesEngage TV Mode Select Channel for ViewingTo Record SAP Programs Stereo And SAP Second Audio ProgramVCR Plus+ Timer Programming EN Timer RecordingNumber Tion is displayed on Timer-Recording informaPlusCode number you Entered and the matchingInitial SET, then press VCR Plus+ SetupVCR Plus+ Guide Channel Matching PLUS%Þ to movePress CH5, Shuttle Access Guide Channel SET ScreenExpress Timer Programming SET Program DateSET Channel Number Engage Timer Mode Program RE-ENGAGE TimerCheck, Cancel And Revise Programs Press TIMER, then press PowerSelect Auto SP EP Timer SET Mode Auto SP→EP TimerAuto Timer Press REC on the front panel Instant Timer Recording ITREngage ITR Mode SET Recording DurationEdit To Or From Another Edit From a Camcorder Access Function SET ScreenEnable Remote Pause Function Set the camcorder to its play modeSet your VCR to its record mode Operate TV TV Multi-Brand Remote ControlTurn on the TV SET TV Brand CodeCable Box Multi-Brand Remote Control Turn on the Cable BOXOperate Cable BOX Enter DBS Receiver Brand EN Special FeaturesDBS Receiver Multi-Brand Remote Control Turn on the DBS ReceiverTurn VCR Power on Unplug Vcrs PowerSET Remote Control Plug in Power CordCassette gets stuck partway Set the switch to the positionHas not been programmed correctly Cassette is automatically Timer againRe-perform the VCR Plus+ setup Doesn’t work properly Procedure pg Those in the previous areaOubleshooting Other ProblemsWhat happens if the tape runs out during recording? Questions and Answer S E NCan the VCR indefinitely remain in the still mode? Can the VCR indefinitely remain in the Record-Pause mode?List Of Terms Express Timer ProgrammingMBR Multi-Brand Remote Code Setting EN IndexFront View Rear View How To Use Remote Control20C to 60C -4F to140F GeneralFor Servicing Only in U.S.A HOW to Locate Your JVC Service CenterLimited Warranty Warranty Only in U.S.AMemo HR-VP656U

HR-VP656U specifications

The JVC HR-VP656U is a sophisticated VHS VCR that embodies both vintage technology and user-friendly features, making it a standout choice for enthusiasts of analog video recording. Notable for its practicality and functionality, the HR-VP656U is designed to appeal to a wide range of users, from casual viewers to those with a penchant for archiving home videos.

One of the most significant features of the HR-VP656U is its ability to handle a variety of tape formats, including standard VHS and S-VHS. This versatility allows users to play and record in different formats, making it compatible with an extensive library of existing tapes. The device also comes equipped with high-quality playback capabilities, ensuring that both audio and video quality are preserved during playback.

The HR-VP656U employs a unique VHS Hi-Fi audio system that significantly enhances the sound quality of recordings, providing sharp and clear audio that complements the visual experience. Additionally, the unit features a digital noise reduction system, which minimizes static and interference during playback, resulting in a more polished and enjoyable viewing experience.

Another hallmark of the JVC HR-VP656U is its user-friendly interface, which includes an easy-to-navigate on-screen menu system. Features like timer recording are also included, allowing users to schedule recordings with ease. The device supports a variety of recording speeds, giving users control over tape usage and recording length, which is particularly useful for those archiving longer events or shows.

The remote control functionality offers added convenience, enabling users to operate the VCR from a distance. This feature is ideal for those who prefer to sit back and enjoy their movies without the need to get up and manually operate the device.

The sleek, compact design of the HR-VP656U adds to its appeal, allowing it to fit seamlessly into any home entertainment setup. Its reliability and performance have made it a preferred choice for those seeking a dependable VHS recording solution as well as a solid option for nostalgia lovers wishing to relive the glory days of analog video. Overall, the JVC HR-VP656U stands as a notable example of the classic VHS technology, embodying a balance of performance, quality, and user-centric design.
Top Page Image Contents