JVC HR-VP472U, HR-VP672U manual Express Timer Programming, SET Program Date

34ENTIMERRECORDING(cont.)

Express Timer Programming

Turn on the TV and select the VCR channel 3 or 4 (or AV mode).

[VP672U]

[VP472U]

1 2 3

2

4 5 6

7 8 9

0 4

START+/–

PROG. 1

STOP+/– DATE+/–

You can directly program the VCR’s timer to record up to 8 shows, as far as a year in advance. Remember, the clock must be set before you can program the timer ( pg. 8 or 11).

1	LOAD A CASSETTE
	Make sure the record safety tab is intact. If not,
	cover the hole with adhesive tape, then load it into
	the VCR.
	The VCR comes on, and the counter is reset,
	automatically.
	ACCESS VCR PLUS+
2	SCREEN
	Press PROG.
	ACCESS PROGRAM
	SCREEN	PROGRAM 1
3	Press START +/–. (If you’re	START	STOP
		– –:– –AM	= – –:– –AM
	just starting out,
		DATE	CH
	“PROGRAM 1” appears.)	– –/– –/– –	– – – SP
		PRESS (+/–, SP/EP, 8=DAILY,
		9=WEEKLY), THEN (0K)
		PRESS (PROG.) TO END
4	SET PROGRAM START TIME
	Press START +/– to enter	PROGRAM 1
	the time you want record-
		8:00 AM	= – –:– –AM
	ing to start.
		START	STOP
	Press and hold START	DATE	CH
		– –/– –/– –	– – – SP
	+/– to move in 30-minute
	increments, or press and	PRESS (+/–, SP/EP, 8=DAILY,
	release repeatedly to	9=WEEKLY), THEN (0K)
	move 1 minute at a time.	PRESS (PROG.) TO END
5	SET PROGRAM STOP TIME
	Press STOP +/– to enter the time you want recording to
	stop.
	Press and hold STOP +/– to move in 30-minute
	increments, or press and release repeatedly to move 1
	minute at a time.
6	SET PROGRAM DATE
	Press DATE +/–. (The current date is displayed on
	screen. The date you enter appears in its place.)