JVC HR-VP672U manual Check Contents, Situate VCR, Connect VCR to TV, Connect VCR to Power Source

Page 7

1

2

3

If your

4

5

CHECK CONTENTS

Make sure the package contains all of the accessories listed in “SPECIFICATIONS” ( pg. 53).

SITUATE VCR

Place the VCR on a stable, horizontal surface.

CONNECT VCR TO TV

The connection method you use depends on the type of TV you have.

RF Connection

To Connect To A TV With NO AV Input Terminals . . .

a– Disconnect the TV antenna from the TV.

b– Connect the TV antenna cable to the ANT. IN jack on the rear of the VCR.

c– Connect the supplied RF cable between the RF OUT jack on the rear of the VCR and the TV’s antenna terminal. Set TV on CH3 or CH4 corresponding to the CH3 – CH4 switch setting on the back of the VCR.

AV Connection

To Connect To A TV With AV Input Terminals . . .

a– Connect the antenna, VCR and TV as shown in the illustration.

b– Connect an Audio/Video Cable between the AUDIO OUT and VIDEO OUT jacks on the rear of the VCR and the AV IN jacks on the TV. Set your TV in video input mode or A/V input mode. Refer to the TV Instruction Manual.

For HR-VP472U Owners:

If your TV has AUDIO IN L and R connectors, connect the VCR to the L connector.

CONNECT VCR TO

POWER SOURCE

Connect the power plug to an AC outlet.

The clock and tuner channels will automatically be set when the antenna is connected and when the AC is first connected to the VCR ( pg. 8).

(If "Auto" or "CH" is displayed on the front display panel before the VCR is powered on, the clock and tuner channels are being set automatically. Wait for the time to be displayed on the front display panel before powering on the VCR.)

FINAL PREPARATION FOR USE

Power on the VCR and select the VCR channel (3 or 4) by setting the switch on the rear of the VCR as shown in the illustration.

You can now perform simple playback ( pg. 16) or simple recording ( pg. 17).

EN7

NOTES:

The VCR channel is the channel on the TV which will display the audio and video signals from the VCR. The VCR's CH3- CH4 switch, on the back of the VCR, sets the VCR channel to CH3 or CH4.

The CH3–CH4 switch is preset to the CH3 position.

Set to CH4 if CH3 is used for broadcasting in your area and set the channel on the TV to correspond to the VCR's CH3– CH4 switch setting.

If RF connection to TV is used, when switching from VCR to TV mode and from TV to VCR it may be necessary to issue a CH UP and then CH DOWN on TV to obtain a good quality picture.

Even if you are using AV cables to connect your VCR to your TV, you must also connect it using the RF cable. This will ensure that you can record one show while watching another ( pg. 28).

For full identification of the VCR's rear panel, refer to the Index (REAR VIEW pg. 51).

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Instructions Do not place the VCR Dear CustomerGrounding or Polarization Power SourcesPower Cord Protection Power Lines Replacement Parts Accessories Damage Requiring Service CleaningContents Back of VCR EN Installing Your NEW VCRBasic Connections VP472UConnect VCR to TV Check ContentsConnect VCR to Power Source Situate VCRAuto Clock Set/Auto Tuner Set Plug & Play SetupPlug & Play EN I Nitial Sett IngsInformation Language Shuttle PLUS%Þ, then Press OK or Shuttle Access Clock SETClock PreparationSemi-Auto Select D.S.T. ModeSET Auto Clock to on Select Host ChannelSET Date Select Time ZoneReturn to Normal Screen SET TimeSET Access Main Menu ScreenAccess Tuner SET Screen TunerAdd Or Delete a Channel Access Manual Channel SET ScreenADD or Skip Desired ChannelSimple Playback Simple Recording Search Playback FeaturesActivate FRAME-BY Frame PlaybackActivate HIGH-SPEED Access Distant CodeEngage Manual Tracking Mode Adjust Manual TrackingPicture Control Access Function SET ScreenSelect Picture Control SET Mode Layback and Recording FeaturesVideo Stabilizer Stop Repeat Start RepeatSuperimpose Select The Soundtrack HR-VP672U Only Access Function SETSET Mode Select Audio MonitorMovie Advance HR-VP672U Only Access Skip MenuPerform Movie AdvanceActive Video Calibration Recording PlaybackRecord One Program While Watching Another Recording FeaturesEngage TV Mode Select Channel for ViewingTo Record SAP Programs HR-VP672U Only Stereo And SAP Second Audio Program HR-VP672U OnlyEN Timer Recording VCR Plus+ Timer ProgrammingInput Receiving Channel Number Tion is displayed on Timer-Recording informaPlusCode number you Entered and the matchingVCR Plus+ Guide Channel Matching VCR Plus+ SetupInitial SET, then press Press CH5, Shuttle Access Guide Channel SET ScreenInput Guide Channel NumberSET Program Date Express Timer ProgrammingSET Channel Number Engage Timer ModeProgram Cancel or Revise aRE-ENGAGE Timer Check, Cancel And Revise ProgramsAuto Timer Auto SP→EP TimerDuration Instant Timer Recording ITREngage ITR Mode SET RecordingEdit To Another VCR VP472U Recorder Edit From a Camcorder Or Another VCRLoad a Cassettes VP672U RecorderSet to AUX. Press the Number key 0 and/or CH to select F-1 SET RECORDER’S Input ModeSetNOTEthe camcorder to its play mode Set your VCR to its record modeSET TV Brand Code EN Special FeaturesTV Multi-Brand Remote Control Turn on the TVOperate Cable BOX Cable Box Multi-Brand Remote ControlTurn on the Cable BOX Enter Cable BOX BrandEnter DBS Receiver Brand EN SP Ecial FeaturesDBS Receiver Multi-Brand Remote Control Turn on the DBS ReceiverTurn VCR Power on Unplug Vcrs PowerSET Remote Control Plug in Power CordCassette gets stuck partway Recorder’s input mode has been Set incorrectly Input modeMake sure the cassettes window is Re-perform the VCR Plus+ setup Doesn’t work properly Timer againProcedure Those in the previous area What happens if the tape runs out during recording? EN Questions and AnswersCan the VCR indefinitely remain in the still mode? Can the VCR indefinitely remain in the Record-Pause mode?List Of Terms Express Timer ProgrammingMBR Multi-Brand Remote Code Setting IndexFront View VP472U EN IndexRear View VP672U Remote Control HR-VP672U SpecificationsFor S Ervicing Only in U.S.A HOW to Locate Your JVC Service CenterLimited Warranty Warranty Only in U.S.A. E NHR-VP672U/472U
Top Page Image Contents