JVC Tape-To-Tape Editing, Recorded tape HR-J251MS, Playback equipment, Dubbed tape

Page 25

EN25

Playback

This recorder can play back all 3 types of recorded tape.

Recorded tape		HR-J251MS
PAL	Playback circuit
	Playback circuit
	PAL			Multi-system receiver
	PAL
MESECAM				PAL
				PAL
	MESECAM	Built-in		(B/G, D/K, I)
	MESECAM		RF OUT

		RFconverter
		RFconverter
NTSC	NTSC[PAL	K, I, G
NTSC
	NTSC 3.58 MHz
				Multi-system monitor
	Manual switching
Manual				PAL
switching				PAL
switching	NTSC 4.43 MHz			SECAM
			VIDEO OUT	SECAM
				NTSC 3.58
				NTSC 3.58
			AUDIO OUT	NTSC 4.43

NOTES:

When viewing NTSC tapes on a PAL TV set:

●The picture may shrink vertically with black bars appearing at the top and bottom of the screen. This is not a malfunction on the part of the video recorder nor the TV.

●The picture may roll up or down. This can be corrected using the V-HOLD control found on some TVs. (This cannot be corrected if the TV does not have a V-HOLD control.)

●During search, still, or frame-by-frame playback, the picture will be distorted, and there may be a loss of colour.

ATTENTION:

When this recorder is connected to a multi-system TV, the audio signal may not be heard or may be noisy if the colour system select switch of the TV is adjusted to the AUTO position. In such a case, set the TV's colour system select switch to the appropri- ate position which corresponds to the TV system you have selected at the TV System Select screen.

Tape-To-Tape Editing

There are 4 different types of recorded tape, depending on the signal recorded.

Recorded tape

PAL

MESECAM

SECAM

NTSC

Playback equipment

PAL

MESECAM

SECAM

NTSC 3.58 MHz

NTSC 4.43 MHz

HR-J251MS

PAL

MESECAM

Recording circuit

NTSC 3.58 MHz

NTSC 4.43 MHz

Dubbed tape

PAL

MESECAM

NTSC

Image 25

Contents HR-J251MS Auto Head Cleaner Safety PrecautionsDo not place the recorder Basic Connections Check ContentsSituate Recorder Connect Recorder to MainsVideo Channel Set Access Video Channel SET ModeEN I Nitial Sett Ings With RF ConnectionPress to finish the setting Exit Video Channel SET ModeSET Video Channel With AV ConnectionPerform Auto SET UP Auto Set UpEN Initial Settings Select LanguageSelect TV System During Auto Set UpStart Auto Channel SET Major Countries TV SystemENABLE/DISABLE ON-SCREEN Display Access Main Menu ScreenOn-Screen Displays Turn on the RecorderClock Set Select LanguagePlace the pointer next to Initial SET, then pressLoad a Cassette Basic PlaybackPoint Start PlaybackSearch Playback FeaturesPlayback Activate SLOW-MOTION PlaybackReturn to Automatic Tracking Adjust Tracking ManuallyActivate Repeat Playback EN PlaybackActivate Index Search Tape Position IndicatorActivate Instant Review Index Search Next Function MemoryBasic Recording Reset Counter Recording FeaturesEngage ITR Mode Select Channel to WatchEN Recording S.T. Picture SystemPreparation Playback RecordingOr press Record on the recorder Timer Recording Express Timer ProgrammingEnter Programme Stop Time Enter Programme DateEngage RECORDER’S Timer ModeAccess Program Check Screen Disengage Timer ModeCancel or Replace a Programme Return to Timer ModeAuto Timer Auto SP→LP TimerEdit To Another Video Recorder Input ModeMake Connections SET Recording DECK’SSET RECORDER’S Input Edit From a Camcorder Or Another Video RecorderSource player Mode Display Setting Of The Colour System Select ButtonsMode Description Off-Air RecordingRecorded tape HR-J251MS Tape-To-Tape EditingRecorded tape Playback equipmentSelect Auto CH SET Access Tuner SET ScreenTuner SET Press OK or Push JogþAccess Channel List Access Tuner SETSelect Position SET Desired StationDelete a Channel EN Tuner SETSwap Channel Positions Fine-Tuning Channels EN Troubleshooting Recording Timer againNew one. pg OubleshootingPlayback Recording Questions and Answer S E NFront View IndexDisplay Panel TV VOL +/-, TV Muting Remote ControlSupplied fresh battery actual Specification SMaximum recording time Rotary two-head helical scanHR-J251MS