JVC HR-J260EU specifications Enter Channel Position, Engage RECORDER’S Timer Mode, Timer Warning

EN23

ENTER CHANNEL POSITION

5	Press TV PROG +/–.		– P1 –
		START		STOP
		21:00	=	22:00
		DATE		TV PROG
		25.12			1
	[+/–] =				ARD

Timer Warning

If you have programmed your recorder to timer-record a programme or a series of programmes, a warning appears on screen to tell you that the recording is to start in 5 minutes.

–WARNING– TIMER RECORDING

TO START SOON

[]

[PROG] : EXIT

RETURN TO NORMAL

SCREEN

6 After confirming all information is correct, press PROG or OK. "PROGRAM COMPLETED" appears on the screen for about 5 seconds, then normal screen appears.

●Repeat steps 1 – 6 for each additional programme.

ENGAGE RECORDER’S

TIMER MODE

7 Press ä (TIMER). The recorder turns off automatically and ä appears on the display panel.

●To disengage the timer, press ä (TIMER) again.

To Timer-Record Weekly Or Daily Serials . . .

. . . anytime during steps 1 through 6, press WEEKLY (NUMBER key "9") for weekly serials or DAILY (NUMBER key "8") for daily serials (Monday – Friday). Either "WEEKLY" or "DAILY" appears on the screen. Pressing the button again makes the correspond- ing indication disappear.

NOTE:

You can programme this recorder to timer-record as many as 8 programmes. If you try to programme the recorder to record a ninth, "PROGRAM FULL" appears on screen and "FULL" appears on the front display panel. To record the extra programme, you must first cancel any unnecessary programmes (☞ pg. 24).

NOTES:

●The warning only appears if

you’re not in the Timer mode at that time.

●If this recorder is being used as the player for tape dubbing, the warning screen is recorded on the tape in the other video recorder.

The warning blinks for the entire 5 minutes leading up to the start of timer recording. To clear the display, press .