JVC HR-J260EU Select Language, SET Date and Time, Perform Auto SET UP, Finish Auto SET UP

3

SELECT LANGUAGE

Press OK. The Language Set display appears on the front display panel and/or on the screen.

If you are referring to the front display panel

Press %Þ to select your language code.

Language Code
ENGLISH	: 01	NORSK	: 08
DEUTSCH	: 02	SUOMI	: 09
FRANCAIS	: 03	DANSK	: 10
ITALIANO	: 04	POLSKI	: 11
CASTELLANO : 05		E TINA	: 12
NEDERLANDS : 06		MAGYAR	: 13
SVENSKA	: 07
(Ex.) DEUTSCH is selected for SUISSE
International telephone			Language code
country code

EN5

●If you are using the on- screen display, the

AUTO SET screen will			AUTO SET
appear. As Auto Set Up			PLEASE WAIT
progresses, the "	"
mark on the screen		0	+	+	+
moves from left to
right.		[MENU] : EXIT
	Beginning
					End

6	CONFIRM/SET VIDEO CHANNEL
	If you have connected the video recorder to your TV
	via an RF cable only (RF connection)
	The channel that is shown on the display panel is your
	Video Channel.
	To view picture signals from the video recorder, set
	your TV to the Video Channel. — Refer to the
	instructions supplied with your TV set for how to do
	this.

If you are referring to the on-screen display

Press %Þ to move the highlight bar (pointer) to the language of your choice.

NÄCHSTE SEITE

NORSK

SVENSKA

NEDERLANDS

CASTELLANO

ITALIANO

FRANCAIS

DEUTSCH

ENGLISH

[5°] =

[MENU] : ENDE

(Ex.) DEUTSCH is selected

●If you have selected MAGYARORSZAG (36), CESKA REPUBLIKA (42), POLSKA (48) or OTHER EASTERN EUROPE (EE) in step 2 on page 4, "2OUT" appears in stead of "1OUT".

If you have connected the video recorder to your TV via both an RF cable and a 21-pin SCART cable (AV connection)

You do not need the video channel so you have to set

4

5

SET DATE AND TIME
Press OK. The Clock Set			CLOCK SET
screen appears.
Press %Þ to set the time,		TIME	DATE	YEAR
then press OK or #.		0: 00	01 . 01	99
The "date" display begins
blinking. Repeat the same
procedure to set the date
and year.	[5°] =
	[MENU] : EXIT

●When you set the time,

press and hold %Þ to change the time by 30 minutes.

●When you set the date, press and hold %Þ to change the date by 15 days.

PERFORM AUTO SET UP

Press MENU.

If you are referring to the front display panel

Press %Þ to select "Auto" and press OK or #.

If you are referring to the on-screen display

Press %Þ to move the
high-light bar (pointer) to
"AUTO SET" and press OK	AUTO SET
or #.	T-V LINK

[5°] =

[MENU] : EXIT

"Auto" blinks on the display panel; do NOT press any button on the recorder or remote control until the display panel shows either the display as illustrated in step 6 or "– –:– –".

the video channel to off.

Press TV PROG – until the display panel shows "1OUT– –" to set the Video Channel to off.

To view picture signals from the video recorder, set your TV to its AV mode. — Refer to the instructions supplied with your TV set for how to do this.

FINISH AUTO SET UP

7 Press OK.

NOTES:

●Auto channel set function takes place first; it assigns automati- cally all receivable stations in your area.

●During auto channel set, the recorder recognizes each station name of the detected stations and stores them in the recorder's memory.

●For RF connection users: The video recorder detects the channels which are not occupied by local stations and selects one channel automatically for your Video Channel that is located in the middle of more than 5 vacant channels.

●If there is a power cut, or if you press or MENU while Auto Set Up is in progress, Auto Set Up will be interrupted; be sure to turn off the recorder power once and try again from step 1.