JVC HR-J261EU You can set the B.E.S.T. Biconditional Equalised Signal, Playback, Lot of noise

Page 29

 

 

EN 29

 

 

* The default setting is bold in the table below.

 

 

 

8 B.E.S.T.

 

You can set the B.E.S.T. (Biconditional Equalised Signal

ON

 

Tracking) system to “ON” or “OFF” ( pg. 21).

OFF

 

 

 

 

8 PICTURE CONTROL

This feature helps you to adjust the playback picture

AUTO:

Provides the optimised picture

quality according to your preference. Normally select

 

benefits of the B.E.S.T. Picture

“AUTO”.

EDIT:

System.

NOTES:

Minimizes picture degradation

 

during editing (recording and

● When you select “EDIT”, “SOFT” or “SHARP”, the selected

 

playback).

mode will not change until you select another mode.

SOFT:

● When you select “EDIT” to dub tapes, be sure to select “AUTO”

Reduces image coarseness when

after you finish dubbing the tapes.

 

viewing overplayed tapes containing

 

● When “B.E.S.T.” is “OFF”, “PICTURE CONTROL” switches

 

a lot of noise.

SHARP:

automatically from “AUTO” to “NORM”.

Clearer, sharper-edged picture when

 

 

viewing images with lots of flat,

 

 

same-coloured surfaces such as

 

 

cartoons.

 

 

 

8 AUTO TIMER

When this function is set to “ON”, the timer is

ON

 

automatically engaged when the recorder power is turned

OFF

 

off, and automatically disengaged when the recorder is

 

 

powered back on.

 

 

NOTE:

 

 

For safety, when “AUTO TIMER” is set to “OFF”, all other recorder

 

 

functions are disabled while the Timer mode is engaged. To

 

 

disengage the timer, press # (TIMER).

 

 

 

8 O.S.D.

 

When this function is set to “ON”, various operational

ON

 

indicators appear on the TV screen. Messages appear in

OFF

 

the selected language ( pg. 11 or 12).

 

 

NOTES:

 

 

● When you use this recorder as the source player for editing, be

 

 

sure to set “O.S.D.” to “OFF” before starting.

 

 

● During playback, the operation mode indicators may be

 

 

disturbed depending on the type of tape being used.

 

 

 

8 DIRECT REC

 

When this function is set to “ON”, you can easily start

ON

 

recording the programme that you are watching on your

OFF

 

TV. Press and hold 7 and press 4 on the remote control,

 

 

or press 7 on the recorder.

 

 

NOTES:

 

 

● When you use the Direct Rec function, be sure to use a TV

 

 

offering T-V LINK, etc. and connect a fully-wired 21-pin SCART

 

 

cable between the recorder and the TV ( pg. 7).

 

 

● If “DIRECT REC” is set to “OFF”, the 7 button functions as

 

 

described in “Basic Recording” ( pg. 18).

 

 

● During the Direct Rec, “– –” appears on the front display panel.

 

 

 

Page 28 Page 30
Image 29
Page 28 Page 30
Contents Video Cassette Recorder English Safety Precautions Moisture Condensation Front View Front Display Panel Operating JVC TVs How To UseSituate the recorder Check the contentsConnect the recorder to TV Connect the recorder to mainsSelect your country Auto Set UpTurn on the recorder Select the language Perform Auto Set UpSet the date and time Press rt to select your language code10 EN Perform Preset DownloadSet the video channel Press rt to select CH - and press OK or eLanguage for the on-screen display InformationAccess the Country Set screen Access the Main Menu screenLanguage 12 ENLink Functions NexTView Link TV Auto Power OnVCR Auto Standby Direct Rec14 EN Basic PlaybackHigh-Speed Search Slow MotionVariable Speed Search Pause during playbackInstant ReView 16 ENManual Tracking Skip Search Index SearchNext Function Memory Repeat Playback18 EN Engage the ITR mode Instant Timer Recording ITRWatching Another Set the recording duration20 EN Reset the counterTape Remaining Time Press 0000 before starting recording or playbackRecording Playback22 EN Express Timer ProgrammingTo Timer-Record Weekly Or Daily Serials Engage the recorder’s timer modeEnter the channel position Press PR +24 EN Confirm the overlapping programmes Cancel or change programme settingSelect the programme to modify Overlapping programmes blink on the TV screen26 EN Edit From a CamcorderAnother Video Recorder Set the input mode of recording deckStart the source player Start the recording deckAccess the Mode Set screen Mode SetSelect the mode Select the mode settingThis feature helps you to adjust the playback picture You can set the B.E.S.T. Biconditional Equalised SignalWhen this function is set to ON, the timer is Off, and automatically disengaged when the recorder isAbout Ntsc Playback 30 ENStart the clock operation Access the Clock Set screenClock Set Tuner Set Access the Auto Channel Set screen32 EN Auto Channel SetPress OK twice Perform Auto Channel SetView the Confirmation screen Manual Channel Set 34 ENDelete a Channel Set Stations B 36 ENSet Stations a Station Name TV Station And ID ListExit the Video Channel Set mode Access the Video Channel Set modeVideo Channel Set 38 ENPower Recording 40 ENOther Problems Playback 42 ENTimer warning display Tuner Set Auto Set UpS.T. Picture System Change Station Channel Position Delete a ChannelMemory backup time Approx min Signal systemFields IN/OUT x

HR-J261EU specifications

The JVC HR-J261EU is a notable VHS video cassette recorder renowned for its user-friendly features and solid performance, making it a staple in many homes during its heyday. This model combines advanced technologies with a straightforward design, appealing to both casual users and dedicated enthusiasts of home video.

One of the standout features of the HR-J261EU is its incorporation of JVC's own Super VHS (S-VHS) compatibility. This technology allows for superior video resolution and enhanced picture quality, making it particularly appealing for users looking to archive important recordings or enjoy old VHS tapes with improved clarity. The device supports both standard VHS and S-VHS cassettes, offering versatility for users who may have a collection of both formats.

The HR-J261EU is equipped with a range of recording and playback functions, including the ability to record in SP and LP modes. This flexibility enables users to choose between standard recording time and extended recording capabilities, thereby maximizing the use of tape length based on their specific needs. The built-in timer function adds convenience, allowing users to schedule recordings easily, ensuring they don't miss their favorite shows.

For ease of operation, the JVC HR-J261EU features a straightforward front panel with an intuitive layout, making it easy for users to navigate through various functions. The device includes a clear display for monitoring playback and recording status, further enhancing user experience.

Audio quality is another strong point of this model, as it supports various audio formats, ensuring that users enjoy rich sound alongside their video. The noise reduction technology integrated into the HR-J261EU aims to minimize graininess and improve the overall viewing experience.

Additionally, this model features an array of input and output connections, including composite video and audio jacks, which enable seamless integration with other home entertainment components like TVs and audio systems.

Its compact design allows the JVC HR-J261EU to fit easily into any entertainment setup without taking up excessive space. Overall, the JVC HR-J261EU is a reliable and efficient VHS recorder, combining essential features with advanced technology to deliver a satisfying user experience in video playback and recording.
Top Page Image Contents