JVC HR-J261EU 38 EN, Access the Video Channel Set mode, Set the RF output system

Page 38

38 EN

SUBSIDIARY SETTINGS (cont.)

Video Channel Set

Video channel (RF output channel) is the channel on which your TV receives picture and sound signals from the recorder through the RF cable.

IMPORTANT

Perform the following steps only if —

—interference appears in the TV picture after you have moved to a different area or a new station has started broadcasting in your area.

—you change the connection between your recorder and TV from RF connection to AV connection, or vice versa.

If you have connected the recorder to your TV via the AV connection ( pg. 7), since you do not need the video channel you have to set the video channel to off.

If you have connected the recorder to your TV via the RF connection ( pg. 7), you have to set the correct video channel.

Before performing the following steps:

Make sure the recorder’s power is off and there is no cassette inserted in the recorder.

A Access the Video Channel Set mode.

Hold down 0 on the recorder until the front display panel shows the following.

B Set the RF output system.

The blinking number on the display indicates the RF output system of your country.

●If you have selected MAGYARORSZÁG (36), CESKÁ

REPUBLIKA (42), POLSKA (48) or OTHER EASTERN EUROPE (EE) for the country setting ( pg. 8, 12), press rt to set to “2”.

●For other countries, set to “1”. Then press OK. (1: B/G 2: D/K)

Then set your TV to UHF channel 50.

●If the two vertical white bars appear clearly on the TV screen as shown to the right, go to step 4.

●If the two vertical white bars do not appear clearly, re-set the video recorder to another vacant channel and try again.

NOTES:

●If you set the video recorder to a channel which is occupied by a local station or has neighbouring channels that are occupied by local stations, the picture reception quality will be affected and some interference noise will appear on the TV screen. Be sure to select a vacant channel which has no broadcast on neighbouring channels.

●If you cannot obtain the two vertical white bars clearly with any channel between 22 and 69, consult your JVC dealer.

D Exit the Video Channel Set mode.

Press OK on the remote control.

C Set the video channel.

With AV Connection

Press PR – until the front display panel shows “1OUT– –” (or “2OUT– –”).

●Now the video channel is set to off.

With AV Connection

To view picture signals from the video recorder, set your TV to its AV mode.

With RF Connection

The channel on which the TV screen in step 3 appears clearly is your video channel.

To view picture signals from the video recorder, set your TV to the video channel.

With RF Connection

Press PR + or – to set the video recorder to a vacant channel between 22 and 69 which is not occupied by any local station in your area.

(Example) If channel 50 is available in your area

Page 37 Page 39
Image 38
Page 37 Page 39
Contents Video Cassette Recorder English Safety Precautions Moisture Condensation Front View Front Display Panel How To Use Operating JVC TVsConnect the recorder to TV Check the contentsSituate the recorder Connect the recorder to mainsSelect your country Auto Set UpTurn on the recorder Set the date and time Perform Auto Set UpSelect the language Press rt to select your language codeSet the video channel Perform Preset Download10 EN Press rt to select CH - and press OK or eInformation Language for the on-screen displayLanguage Access the Main Menu screenAccess the Country Set screen 12 ENVCR Auto Standby NexTView Link TV Auto Power OnLink Functions Direct RecBasic Playback 14 ENVariable Speed Search Slow MotionHigh-Speed Search Pause during playbackInstant ReView 16 ENManual Tracking Next Function Memory Index SearchSkip Search Repeat Playback18 EN Watching Another Instant Timer Recording ITREngage the ITR mode Set the recording durationTape Remaining Time Reset the counter20 EN Press 0000 before starting recording or playbackPlayback RecordingExpress Timer Programming 22 ENEnter the channel position Engage the recorder’s timer modeTo Timer-Record Weekly Or Daily Serials Press PR +24 EN Select the programme to modify Cancel or change programme settingConfirm the overlapping programmes Overlapping programmes blink on the TV screenEdit From a Camcorder 26 ENStart the source player Set the input mode of recording deckAnother Video Recorder Start the recording deckSelect the mode Mode SetAccess the Mode Set screen Select the mode settingWhen this function is set to ON, the timer is You can set the B.E.S.T. Biconditional Equalised SignalThis feature helps you to adjust the playback picture Off, and automatically disengaged when the recorder is30 EN About Ntsc PlaybackStart the clock operation Access the Clock Set screenClock Set 32 EN Access the Auto Channel Set screenTuner Set Auto Channel SetPress OK twice Perform Auto Channel SetView the Confirmation screen 34 EN Manual Channel SetDelete a Channel Set Stations B 36 ENSet Stations a TV Station And ID List Station NameVideo Channel Set Access the Video Channel Set modeExit the Video Channel Set mode 38 ENPower 40 EN RecordingOther Problems 42 EN PlaybackS.T. Picture System Change Station Channel Position Auto Set UpTimer warning display Tuner Set Delete a ChannelFields Signal systemMemory backup time Approx min IN/OUT x

HR-J261EU specifications

The JVC HR-J261EU is a notable VHS video cassette recorder renowned for its user-friendly features and solid performance, making it a staple in many homes during its heyday. This model combines advanced technologies with a straightforward design, appealing to both casual users and dedicated enthusiasts of home video.

One of the standout features of the HR-J261EU is its incorporation of JVC's own Super VHS (S-VHS) compatibility. This technology allows for superior video resolution and enhanced picture quality, making it particularly appealing for users looking to archive important recordings or enjoy old VHS tapes with improved clarity. The device supports both standard VHS and S-VHS cassettes, offering versatility for users who may have a collection of both formats.

The HR-J261EU is equipped with a range of recording and playback functions, including the ability to record in SP and LP modes. This flexibility enables users to choose between standard recording time and extended recording capabilities, thereby maximizing the use of tape length based on their specific needs. The built-in timer function adds convenience, allowing users to schedule recordings easily, ensuring they don't miss their favorite shows.

For ease of operation, the JVC HR-J261EU features a straightforward front panel with an intuitive layout, making it easy for users to navigate through various functions. The device includes a clear display for monitoring playback and recording status, further enhancing user experience.

Audio quality is another strong point of this model, as it supports various audio formats, ensuring that users enjoy rich sound alongside their video. The noise reduction technology integrated into the HR-J261EU aims to minimize graininess and improve the overall viewing experience.

Additionally, this model features an array of input and output connections, including composite video and audio jacks, which enable seamless integration with other home entertainment components like TVs and audio systems.

Its compact design allows the JVC HR-J261EU to fit easily into any entertainment setup without taking up excessive space. Overall, the JVC HR-J261EU is a reliable and efficient VHS recorder, combining essential features with advanced technology to deliver a satisfying user experience in video playback and recording.
Top Page Image Contents