JVC HR-VP82U manual Select D.S.T. Mode, Select Mode, Make Corrections, Auto, Manual

1

2

3

NUMBER

4

5

6

7

8

9

0

5

SELECT MODE

At the Override Auto Clock Set screen, place the arrow

next to "AUTO CLOCK SET" by pressing CH▲▼ or

SHUTTLE PLUS 5°, then power off the VCR. Do not

power it on again until the clock has been adjusted.

The clock is automatically adjusted on the hour except

at 11:00 PM, midnight, 1:00 AM and 2:00 AM.

5

SELECT MODE

At the Override Auto Clock Set screen (☞ pg. 10), place

the arrow next to “MANUAL CLOCK SET” by pressing

CH▲▼ or SHUTTLE PLUS

5

, then press OK.

°

6

SET DATE, TIME AND D.S.T.

The Manual Clock Set

MANUAL CLOCK SET

screen is displayed and the

first setting that can be set

DATE

1/ 1/96 MON

TIME

– – : – – AM

begins flashing.

D.S.T.

ON

Press the appropriate

NUMBER keys to set the

PRESS NUMBER KEY(0-9)

date and time (if only 1

OR (5,°), THEN (OK)

digit, press "0" first). Press

PRESS (MENU) TO END

CH▲▼ or SHUTTLE PLUS

5° to set AM/PM and D.S.T. (Daylight Saving Time) to

“ON” (automatic adjustment based on VCR’s clock) or

“OFF” (if D.S.T. doesn’t apply to you).

Press OK after AM/PM and D.S.T. settings. The next

setting that can be set begins flashing. When you’re

finished with this set-up procedure, press MENU to start

the clock.

NOTE:

CH5° and SHUTTLE PLUS 5° can be used to perform

all operations. (In this case, press OK after each setting.)

7

MAKE CORRECTIONS

To change any of the settings, press OK or SHUTTLE

PLUS ª£ until the item you want to change

blinks, then set as in step 6.