50
TROUBLESHOOTING
Before requesting service for a problem, use this chart and see if you can repair the trouble yourself. Small problems are often easily corrected, and this can save you the trouble of sending your VCR off for repair.
POWER |
|
|
|
|
| |
|
|
|
|
|
|
|
| SYMPTOM |
| POSSIBLE CAUSE |
| CORRECTIVE ACTION |
|
1. | The power won’t come on. |
| ● The power cord is disconnected. |
| Connect the power cord. |
|
|
|
|
|
|
|
|
2. | The clock works, but the VCR’s |
| ● The TIMER mode is engaged with |
| Press TIMER to disengage. |
|
| power won’t come on. |
| Auto Timer set to "OFF" (☞ pg. 41). |
|
|
|
|
|
|
|
|
|
|
3. | The remote control won’t function. |
| ● The batteries are discharged. |
| Replace the dead batteries with new ones. |
|
|
|
| ● The A/B CODE switch is in the |
|
| |
|
|
| wrong position. |
| (☞ pg. 49). |
|
|
|
| ● The TV/CABLE/VCR switch is in the |
| Set the switch to the position |
|
|
|
| wrong position. |
| corresponding with the unit you want |
|
|
|
|
|
| to operate. |
|
|
|
|
|
|
| |
TAPE TRANSPORT |
|
|
|
|
| |
| SYMPTOM |
| POSSIBLE CAUSE |
| CORRECTIVE ACTION |
|
1. The cassette gets stuck partway |
| ● The cassette was inserted incorrectly. |
| Make sure the window side is up, the |
| |
| during loading, and is ejected. |
|
|
| rear label side is facing you and the |
|
|
|
|
|
| arrow on the front of the cassette is |
|
|
|
|
|
| pointing towards the VCR. Then insert |
|
|
|
|
|
| the cassette |
|
|
|
|
|
|
| |
2. The tape stops during rewind or |
| ● The Counter Memory indicator |
| Press C.MEMORY to disengage the |
| |
| fast forward. |
| (“M”) is lit on the front display |
| Counter Memory mode and extin- |
|
|
|
| panel. |
| guish the indicator. |
|
|
|
|
|
|
| |
PLAYBACK |
|
|
|
|
| |
|
|
|
|
|
|
|
| SYMPTOM |
| POSSIBLE CAUSE |
| CORRECTIVE ACTION |
|
1. | The tape is running but the picture |
| ● If you’re using the RF OUT connec- |
| Set the channel selector to channel 3 |
|
| won’t appear. |
| tion (☞ pg. 6), the channel selector |
| or 4. |
|
|
|
| on the TV is set incorrectly. |
|
|
|
|
|
| ● If you’re using the AV connection |
| Set the TV receiver to its AV mode. |
|
|
|
| (☞ pg. 6), the TV receiver is set to |
|
|
|
|
|
| the wrong mode. |
|
|
|
|
|
|
|
|
|
|
2. | Noise appears during visual search. |
| ● This is normal. |
|
|
|
|
|
|
|
|
|
|
3. | Breaks are noticeable in |
| ● Automatic tracking is engaged. |
| Engage and adjust tracking manually |
|
| soundtrack. |
|
|
| (☞ pg. 26). |
|
|
|
|
|
|
|
|
4. | The playback picture is blurred or |
| ● The video heads may be dirty. |
| The heads must be cleaned. Consult |
|
| interrupted, even though TV |
|
|
| your JVC dealer (☞ pg. 58). |
|
| broadcasts are clear. |
|
|
|
|
|
|
|
|
|
|
|
|
5. | The |
| ● The AUDIO MONITOR option at |
| Set AUDIO MONITOR to |
|
| heard. |
| the Function Set screen was set |
| (☞ pg. 27). |
|
|
|
| incorrectly. |
|
|
|
|
|
|
|
|
|
|
6. | SHUTTLE ring does not work |
| ● A turn of the SHUTTLE which is too |
| Release the SHUTTLE, then turn it |
|
| properly during search. |
| rapid may not be properly recognized. |
| again more slowly. |
|
|
|
|
|
|
|
|