JVC LPT0640-001A Check the programme data, Set the VPS/PDC mode, Engage the recorder’s timer mode

Page 37

EN 37

G Check the programme data.

The SHOWVIEW number you entered and the matching timer-recording information are displayed on the TV screen. Check they are correct.

The front display panel shows the programme start time. Pressing " changes the display to the programme stop time, then the date and channel position.

IMPORTANT

Make sure the channel position number you wish to record is displayed; if not, see “G-CODE™/SHOWVIEW™ System Setup” on page 82 and set the Guide Program number correctly.

H Set the tape speed.

Press SP/LP (p).

I Set the VPS/PDC mode.

Press VPS/PDC to select “ON” or “OFF”.

●If “VPS/PDC ON” is displayed on the TV screen or “VPS/PDC” is lit on the front display panel, VPS/PDC is set to ON.

●If “VPS/PDC OFF” is displayed on the TV screen or “VPS/PDC”

is not lit on the front display panel, VPS/PDC is set to OFF.  “VPS/PDC Recording” on page 39.

J Return to the normal screen.

Press PROG or OK. “PROGRAM COMPLETED” appears on the TV screen for about 5 seconds, then the normal screen appears. If “PROGRAM OVERLAPPED” appears on the TV screen and “Err” on the front display panel, see page 43.

●Repeat steps 3 – 10 for each additional programme.

K Engage the recorder’s timer mode.

Press # (TIMER). The recorder turns off automatically and “#” appears on the front display panel.

●To disengage the timer mode, press # (TIMER) again.

Satellite Receiver Users

To timer-record a satellite broadcast using the SHOWVIEW system:

APerform “Satellite Receiver Control Setting” on page 17.

BPerform steps 1 – 11. In step 7, the front display panel shows “L2” for the channel position. In step 9, you cannot set “VPS/PDC” to “ON”.

CLeave the satellite receiver’s power on.

NOTES:

●To Change The Stop Time . . .

. . . press STOP +/– in step 7. You can compensate for anticipated programme schedule delays.

●To Timer-Record Weekly Or Daily Serials . . .

. . . in step 7, press WEEKLY (number key “9”) for weekly serials or DAILY (number key “8”) for daily serials (Monday — Friday). Either “WEEKLY” or “DAILY” appears on the TV screen. Pressing the button again makes the corresponding indication disappear.

●You can programme each deck to timer-record as many as 6 programmes. If you try to programme the recorder to record a seventh, “PROGRAM FULL” appears on the TV screen and “FULL” appears on the front display panel. To record the extra

programme, you must first cancel any unnecessary programmes ( pg. 42).

●It is not possible to timer-record a TV programme with a SHOWVIEW number which starts with “0”.

●It is not possible to timer-record a satellite broadcast received on the channel position “0” by the satellite receiver.

●It is not possible to timer-record the same programme on both the VHS deck and the DV deck simultaneously.

●During timer recording, it is not possible to change the recording deck (VHS or DV).

●If the times that are programmed for recording on the DV deck and on the VHS deck overlap, the earlier start time takes precedence. If the start times are the same, the VHS deck takes precedence.

INFORMATION

Instead of the steps 4 – 6, you can enter the SHOWVIEW number using the on-screen menu.

APress PROG to access the SHOWVIEW screen.

BPress the number keys to

enter the SHOWVIEW number of a programme you wish to record.

●If you make a mistake,

press & and input the correct number.

C Press OK, then go to step 7 in the left column.

●If the number you entered

is invalid, “ERROR” appears on the TV screen and “Err” appears on the front display panel. Input a valid SHOWVIEW number.

●If the “GUIDE PROG SET” screen appears, see “ATTENTION” below.

ATTENTION

Guide Program Number Set

“GUIDE PROG SET” appears after performing step C above if the Guide Program number for the SHOWVIEW number you entered has not been set.

If you want to set the Guide Program number for the satellite broadcast station, press the number key “0” to change “TV PROG” to “SAT”. Press rt to input the channel position number on which your recorder or satellite receiver receives that station, then press OK or e to set the Guide Program number. The SHOWVIEW Program screen appears.

(Example)

To timer-record a ZDF programme with the SHOWVIEW system.

* If your recorder receives ZDF on the channel position 2, press OK or e after entering “2”.

Page 36 Page 38
Image 37
Page 36 Page 38
Contents Video Cassette Recorder Safety Precautions Moisture Condensation Front View Rear View Front Display Panel On the tape BeginningEnd ON-SCREEN Display for VHS deckRemote Control Remote Control LCD How To Use10 EN Check the contentsSituate the recorder Connect the recorder to TVAerial connector To connect to a TV with S-VIDEO/AUDIO in connectorsVideo Connection 12 EN Auto Set UpTurn on the recorder Select your countrySelect the language Perform Auto Set UpPress rtto select your language code Press rtto select Auto and press OK or e14 EN Perform Preset DownloadPress rtto select CH - and press OK or e Progress, it will be interruptedJust Clock Language for the on-screen display pg , Just Clock Access the Country Set screen Access the Main Menu screenLanguage 16 ENSituate the Satellite Controller Installing Satellite ControllerAttach the Satellite Controller Make connections18 EN Setting satellite receivers brand and channelNexTView Link TV Auto Power OnVCR Auto Standby Direct Rec 20 EN Basic PlaybackVHS deck Set the tape speed Choose a programmeStart recording Pause/Resume recordingSlow Motion 22 ENPause during playback Activate frame-by-frame playbackVariable Speed Search High-Speed Turbo SearchIndex Search Skip SearchNext Function Memory 24 ENRepeat Playback Activate Repeat PlaybackManual Tracking Adjust the tracking manuallySoundtrack Selection Override automatic tracking26 EN Instant Timer Recording ITRTape Remaining Time Reset the counterSet the counter display Press 0000 before starting recording or playbackRetake 28 ENReceiving Stereo and Bilingual Programmes Recording PlaybackDV deck 30 ENSelect the DV deck Press DVDV recording indicator turns off 32 EN During playback, turn the JOG dial quickly to the right For forward high-speed searchSearch, or 3 for reverse high-speed search During playback or still, press 5 for forward high-speed34 EN See Audio REC on Time Code36 EN ProgrammingEngage the recorder’s timer mode Set the VPS/PDC modeCheck the programme data Satellite Receiver Users38 EN Express Timer ProgrammingVPS/PDC Recording To Timer-Record Weekly Or Daily SerialsEnter the programme date Enter the channel positionBefore performing the 24 Hour Express Timer Programming Enter the programme mode40 EN Set the programme start/stop time and channelPage 42 EN Confirm the overlapping programmes Cancel or change programme settingSelect the programme to modify Overlapping programmes blink on the TV screen44 EN Tape DubbingFrom DV to VHS Dubbing An Entire Cassette From VHS to DV Dubbing An Entire Cassette Dubbing direction indicator VHS lightsPress DV, then press SP/LP p From DV to VHS 46 ENFrom VHS to DV VHS playback indicator and DV recording indicator lightLocate the start point on the VHS deck Prepare the DV deck for dubbing48 EN Recorder Video input If the camcorder has no S-VIDEO output connectorPlayer 50 EN Another Video RecorderAnother recorder RecorderPlayer Recorder Press rt to move Output/Input SetVHS F-1 Input Setting Select SettingDecoder connector Select the input mode for the Video Video connector54 EN Audio DubbingVHS Audio Dubbing DV Audio DubbingEnd Audio Dubbing Engage the Audio Dubbing modePress A.DUB Insert Editing DV Insert Editing SP mode only56 EN VHS Insert EditingAV Insert Editing VHS deck only Engage the Insert Editing modePrepare the recording cassette Start Editing58 EN Access the R.A.Edit screenSelect the programme Insert a VHS or S-VHS cassette and a Mini DV cassettePrepare the source tape Locate the end pointStart Random Assemble Editing End Random Assemble EditingSet the remote control code Change the remote control code60 EN Display the codeTV PR +/-, TV %+/- Volume, TV Muting, number keys TV Multi-Brand Remote ControlSet the TV brand code Operate the TV62 EN Satellite Receiver Multi-Brand Remote ControlSet the satellite receiver brand code Operate the satellite receiverTo DV in connector About DV IN/OUT connectorDigital printer Pin Scart connector Mains outlet Aerial ConnectorAerialSimple Connections Outdoor unit Satellite cablePerfect Connections Aerial connector Outdoor unit Satellite cablePin Scart Decoder66 EN Select the input modeConnect the decoder Set the tunerFM tuner CD player Stereo amplifier Make connectionsAUX in or Tape Monitor Speaker TelevisionAccess the Mode Set screen Mode SetSelect the mode Select the mode settingDefault setting is bold in the table below Powered back onScreen. Messages appear in the selected language  pg Control, or press 7 on the recorder70 EN VHS Mode SET To record Secam signals, or play back a Mesecam tape To record PAL signals, or play back a PAL or Ntsc tape72 EN Original recorded sound Enables Audio Dubbing laterAudio-dubbed sound Full SOUNDOriginal recorded sound and Audio-dubbed soundTuner Set Access the Auto Channel Set screen74 EN Auto Channel SetView the Confirmation screen Perform Auto Channel SetPress OK twice TV screen moves fromManual Channel Set 76 ENDelete a Channel When Receiving a Scrambled BroadcastSet Stations a 78 ENSet Stations B RTBF1 or TV Station And ID ListClock Set Access the Clock Set screen80 EN Set Just Clock Set the date and timeSet the source channel position for clock data Start the clock operationGuide Program Number Guide Program Number SetEnter the Guide Program number Connect the mains power cord No power is supplied to the recorder84 EN DV deck VHS deckTurn off the recorder once and connect 86 ENNot connected between TV Turn off the recorder or the connectedPlayback Scan system 88 ENLines VHS Lines S-VHS Frequency range Hz to 10,000 Hz to 20,000 Hz Hi-Fi audio Maximum recording timeConnecting To a Printer Auto Channel Set Auto Set UpExpress Timer Programming CODE/SHOWVIEW System Setup90 EN Page International telephone Language code Example Francais 03 is selected for BelgiumCountry code For Customers in Asia, Oceania, Middle East and Africa

LPT0640-001A specifications

The JVC LPT0640-001A is a monitor that epitomizes the advanced technology and remarkable performance that JVC is renowned for in the electronics industry. Designed for professional and home use alike, this product combines precision engineering with user-friendly features to cater to a range of needs.

At its core, the LPT0640-001A features a high-resolution display that enables exceptional image clarity and vivid colors. Boasting a Full HD resolution, the monitor makes it easy to view even the smallest details, essential for photographers, videographers, and designers. The wide color gamut ensures that colors are rendered accurately and vibrantly, providing an immersive viewing experience that enhances both work and entertainment.

One of the standout features of the LPT0640-001A is its advanced LED backlighting technology, which not only improves brightness and contrast ratios but also contributes to energy efficiency. This innovative lighting solution delivers deeper blacks and brighter whites, resulting in images that pop and visuals that come to life. In addition, the monitor's glare-resistant coating provides consistent visibility in bright settings, making it suitable for diverse environments.

The JVC LPT0640-001A is also equipped with a range of connectivity options. Users can connect multiple devices, such as laptops, gaming consoles, and cameras, without hassle. The inclusion of HDMI, VGA, and USB ports offers versatility for both home entertainment systems and professional setups.

Another notable characteristic of the LPT0640-001A is its ergonomic design. The adjustable stand allows users to customize the monitor's height and angle, ensuring comfort during extended use. This attention to ergonomics highlights JVC's commitment to the user experience, making it ideal for prolonged work sessions or binge-watching marathons.

In terms of audio capabilities, the built-in speakers deliver clear sound, further enhancing the overall multimedia experience. While external speakers or sound systems can elevate the audio experience, the integrated speakers provide convenience for casual viewing.

Durability is another hallmark of the JVC LPT0640-001A. With a robust build quality, this monitor is designed to withstand the rigors of frequent use without compromising performance. Moreover, the energy-efficient features align with modern sustainability standards, making it an appealing choice for environmentally conscious consumers.

In summary, the JVC LPT0640-001A is a versatile monitor that combines high-resolution display technology with user-centric features. Its impressive performance, ergonomic design, and comprehensive connectivity options solidify its position as a valuable tool for both professionals and casual users. Whether for graphic design, gaming, or simply enjoying your favorite content, the LPT0640-001A stands out as a reliable and high-quality choice.
Top Page Image Contents