JVC LPT0640-001A Perform Auto Channel Set, View the Confirmation screen, Press OK twice

Page 75

EN 75

1

2

1

2

3

 

4

5

6

3

7

8

9

4

 

 

 

4

0

1

3

2

 

IMPORTANT

●In certain reception conditions, station names may not be stored correctly, and Auto Guide Program Number Set may not work properly. If the Guide Program numbers are not set properly when you timer-record a TV programme using the SHOWVIEW system, the recorder will record a TV programme of a different station. When programming the

timer using the SHOWVIEW system, be sure to check the desired channel is selected correctly ( pg. 36, “G-CODE™/SHOWVIEW™ Timer Programming”).

●Your video recorder memorizes all detected stations even if

reception of some of them is poor. You can delete those stations with an unacceptable picture ( pg. 77, “Delete A Channel”).

NOTES:

●Fine tuning is performed automatically during Auto Channel Set. If you want to perform tuning manually, refer to page 78.

●If you perform Auto Channel Set when the aerial cable is not connected properly, “SCAN COMPLETED –NO SIGNAL–” appears on the TV screen in step 7. When this happens, make sure of the aerial connection and press OK; Auto Channel Set will take place again.

●If no sound accompanies the picture or the audio sounds unnatural on some channels that have been stored by Auto Set Up, the TV system setting for those channels may be incorrect.

Select the appropriate TV system for those channels ( pg. 77, “INFORMATION”).

F Perform Auto Channel Set.

Press OK twice.

●You can set up the recorder’s

tuner also by Preset Download ( pg. 14).

●The Auto Set screen appears, and remains on screen while

the recorder searches for

 

 

receivable stations.

 

 

As Auto Channel Set

 

 

progresses, the “q” mark on

Beginning

End

the TV screen moves from

 

 

left to right. Wait until the TV screen as shown in step 7 appears.

G View the Confirmation screen.

After “SCAN COMPLETED” is displayed on the TV screen for about 5 seconds, the Confirmation screen looking like the one to the right appears. The stations your recorder located appear on a Confirmation screen —

channel positions (PR),

channels (CH) and station names (ID –  pg. 79). The blueback screen and the programme currently being broadcast by the blinking station appear alternately for 8 seconds each. To view the next page, use the rt w e button on the remote control.

●The stations located in the selected country appear at the top of the list.

●The Guide Program numbers will also be set automatically during Auto Channel Set.

H Return to the normal screen.

Press MENU.

●Using the Confirmation screen, you can skip or add channel positions, enter station names and perform other operations. Refer to pages 76 – 78 for the procedures.

●Depending on reception conditions, the stations may not be stored in order, and the station names may not be stored correctly.

●For information on scrambled broadcasts, refer to page 77.

Page 74 Page 76
Image 75
Page 74 Page 76
Contents Video Cassette Recorder Safety Precautions Moisture Condensation Front View Rear View Front Display Panel On the tape BeginningEnd ON-SCREEN Display for VHS deckRemote Control Remote Control LCD How To UseConnect the recorder to TV Check the contents10 EN Situate the recorderTo connect to a TV with S-VIDEO/AUDIO in connectors Aerial connectorVideo Connection Select your country Auto Set Up12 EN Turn on the recorderPress rtto select Auto and press OK or e Perform Auto Set UpSelect the language Press rtto select your language codeProgress, it will be interrupted Perform Preset Download14 EN Press rtto select CH - and press OK or eLanguage for the on-screen display Just Clock pg , Just Clock 16 EN Access the Main Menu screenAccess the Country Set screen LanguageMake connections Installing Satellite ControllerSituate the Satellite Controller Attach the Satellite Controller18 EN Setting satellite receivers brand and channelTV Auto Power On NexTView LinkVCR Auto Standby Direct Rec Basic Playback 20 ENVHS deck Pause/Resume recording Choose a programmeSet the tape speed Start recordingActivate frame-by-frame playback 22 ENSlow Motion Pause during playbackSkip Search High-Speed Turbo SearchVariable Speed Search Index SearchActivate Repeat Playback 24 ENNext Function Memory Repeat PlaybackOverride automatic tracking Adjust the tracking manuallyManual Tracking Soundtrack Selection26 EN Instant Timer Recording ITRPress 0000 before starting recording or playback Reset the counterTape Remaining Time Set the counter display28 EN RetakeReceiving Stereo and Bilingual Programmes Recording PlaybackPress DV 30 ENDV deck Select the DV deckDV recording indicator turns off 32 EN During playback or still, press 5 for forward high-speed For forward high-speed searchDuring playback, turn the JOG dial quickly to the right Search, or 3 for reverse high-speed search34 EN See Audio REC on Time Code36 EN ProgrammingSatellite Receiver Users Set the VPS/PDC modeEngage the recorder’s timer mode Check the programme data38 EN Express Timer ProgrammingEnter the channel position To Timer-Record Weekly Or Daily SerialsVPS/PDC Recording Enter the programme dateSet the programme start/stop time and channel Enter the programme modeBefore performing the 24 Hour Express Timer Programming 40 ENPage 42 EN Overlapping programmes blink on the TV screen Cancel or change programme settingConfirm the overlapping programmes Select the programme to modifyTape Dubbing 44 ENFrom DV to VHS Dubbing An Entire Cassette Dubbing direction indicator VHS lights From VHS to DV Dubbing An Entire CassettePress DV, then press SP/LP p From DV to VHS 46 ENPrepare the DV deck for dubbing VHS playback indicator and DV recording indicator lightFrom VHS to DV Locate the start point on the VHS deck48 EN If the camcorder has no S-VIDEO output connector Recorder Video inputPlayer 50 EN Another Video RecorderRecorder Another recorderPlayer Recorder Press rt to move Output/Input SetSelect the input mode for the Video Video connector Select SettingVHS F-1 Input Setting Decoder connectorDV Audio Dubbing Audio Dubbing54 EN VHS Audio DubbingEngage the Audio Dubbing mode End Audio DubbingPress A.DUB VHS Insert Editing DV Insert Editing SP mode onlyInsert Editing 56 ENStart Editing Engage the Insert Editing modeAV Insert Editing VHS deck only Prepare the recording cassetteInsert a VHS or S-VHS cassette and a Mini DV cassette Access the R.A.Edit screen58 EN Select the programmeEnd Random Assemble Editing Locate the end pointPrepare the source tape Start Random Assemble EditingDisplay the code Change the remote control codeSet the remote control code 60 ENOperate the TV TV Multi-Brand Remote ControlTV PR +/-, TV %+/- Volume, TV Muting, number keys Set the TV brand codeOperate the satellite receiver Satellite Receiver Multi-Brand Remote Control62 EN Set the satellite receiver brand codeAbout DV IN/OUT connector To DV in connectorDigital printer Outdoor unit Satellite cable Aerial ConnectorAerialPin Scart connector Mains outlet Simple ConnectionsDecoder Aerial connector Outdoor unit Satellite cablePerfect Connections Pin ScartSet the tuner Select the input mode66 EN Connect the decoderSpeaker Television Make connectionsFM tuner CD player Stereo amplifier AUX in or Tape MonitorSelect the mode setting Mode SetAccess the Mode Set screen Select the modeControl, or press 7 on the recorder Powered back onDefault setting is bold in the table below Screen. Messages appear in the selected language  pg70 EN VHS Mode SET To record PAL signals, or play back a PAL or Ntsc tape To record Secam signals, or play back a Mesecam tape72 EN Full SOUNDOriginal recorded sound and Audio-dubbed sound Enables Audio Dubbing laterOriginal recorded sound Audio-dubbed soundAuto Channel Set Access the Auto Channel Set screenTuner Set 74 ENTV screen moves from Perform Auto Channel SetView the Confirmation screen Press OK twiceManual Channel Set 76 ENDelete a Channel When Receiving a Scrambled Broadcast78 EN Set Stations aSet Stations B RTBF1 or TV Station And ID ListAccess the Clock Set screen Clock Set80 EN Start the clock operation Set the date and timeSet Just Clock Set the source channel position for clock dataGuide Program Number Set Guide Program NumberEnter the Guide Program number Connect the mains power cord No power is supplied to the recorder84 EN DV deck VHS deckTurn off the recorder or the connected 86 ENTurn off the recorder once and connect Not connected between TVPlayback Hz to 20,000 Hz Hi-Fi audio Maximum recording time 88 ENScan system Lines VHS Lines S-VHS Frequency range Hz to 10,000CODE/SHOWVIEW System Setup Auto Channel Set Auto Set UpConnecting To a Printer Express Timer Programming90 EN Page Example Francais 03 is selected for Belgium International telephone Language codeCountry code For Customers in Asia, Oceania, Middle East and Africa

LPT0640-001A specifications

The JVC LPT0640-001A is a monitor that epitomizes the advanced technology and remarkable performance that JVC is renowned for in the electronics industry. Designed for professional and home use alike, this product combines precision engineering with user-friendly features to cater to a range of needs.

At its core, the LPT0640-001A features a high-resolution display that enables exceptional image clarity and vivid colors. Boasting a Full HD resolution, the monitor makes it easy to view even the smallest details, essential for photographers, videographers, and designers. The wide color gamut ensures that colors are rendered accurately and vibrantly, providing an immersive viewing experience that enhances both work and entertainment.

One of the standout features of the LPT0640-001A is its advanced LED backlighting technology, which not only improves brightness and contrast ratios but also contributes to energy efficiency. This innovative lighting solution delivers deeper blacks and brighter whites, resulting in images that pop and visuals that come to life. In addition, the monitor's glare-resistant coating provides consistent visibility in bright settings, making it suitable for diverse environments.

The JVC LPT0640-001A is also equipped with a range of connectivity options. Users can connect multiple devices, such as laptops, gaming consoles, and cameras, without hassle. The inclusion of HDMI, VGA, and USB ports offers versatility for both home entertainment systems and professional setups.

Another notable characteristic of the LPT0640-001A is its ergonomic design. The adjustable stand allows users to customize the monitor's height and angle, ensuring comfort during extended use. This attention to ergonomics highlights JVC's commitment to the user experience, making it ideal for prolonged work sessions or binge-watching marathons.

In terms of audio capabilities, the built-in speakers deliver clear sound, further enhancing the overall multimedia experience. While external speakers or sound systems can elevate the audio experience, the integrated speakers provide convenience for casual viewing.

Durability is another hallmark of the JVC LPT0640-001A. With a robust build quality, this monitor is designed to withstand the rigors of frequent use without compromising performance. Moreover, the energy-efficient features align with modern sustainability standards, making it an appealing choice for environmentally conscious consumers.

In summary, the JVC LPT0640-001A is a versatile monitor that combines high-resolution display technology with user-centric features. Its impressive performance, ergonomic design, and comprehensive connectivity options solidify its position as a valuable tool for both professionals and casual users. Whether for graphic design, gaming, or simply enjoying your favorite content, the LPT0640-001A stands out as a reliable and high-quality choice.
Top Page Image Contents