EN
17
ENTER CHANNEL |
| |
POSITION |
|
|
Press TV PROG.5/° to |
| – P1– |
select the channel you | START | STOP |
6 wish to record. | 21:00 | = 22:00 |
| SP | |
| DATE | TV PROG. |
| 25.12 | 1 |
| ||
| [PROG./CLOCK] :NEXT | |
7 | SET TAPE SPEED |
Press SP/LP/EP to set the tape speed. | |
| |
● For each additional programme, press PROG. and | |
repeat steps 3 – 7. | |
|
|
| RETURN TO NORMAL |
| SCREEN |
| Press PROG. as many times as necessary to return to |
8 normal screen. | |
| ENGAGE RECORDER’S |
| TIMER MODE |
9 Press TIMER. | |
To Timer-Record Weekly Or Daily Serials . . .
. . . anytime during steps 3 through 7, press WEEKLY (NUMBER key “9”) for weekly serials or DAILY (NUMBER key “8”) for daily serials
NOTES:
●You can programme this recorder to
●For safety, your recorder disables all other functions while in the Timer mode. If you want to use the recorder but its Timer mode is engaged, press TIMER and all other functions are operable. To
●In case of a power failure after programming, the recorder’s memory backup keeps your selections for 18 hours.
●Backup time becomes shorter as the unit's internal parts become old. When this occurs, please consult your nearby JVC dealer.
Check And Cancel
Programmes
SELECT PROGRAMME
2 Press PROG. until the programme you wish to call up appears.
●Each time you press PROG. the next programme's information appears up to "P8" (Programme 8).
●If you want to make a correction, use NUMBER key "1" – "6" and TV PROG.5/°.
●If you want to cancel a programme, press CANCEL.
RETURN TO NORMAL
SCREEN
3 Press PROG. as many times as necessary to return to normal screen.
●Press TIMER to engage the recorder's timer mode.
Auto SP/LP Timer
If, when recording in SP mode, there is not enough tape to record the entire programme, the recorder automatically switches to LP mode (with PAL broadcasts) or EP mode (with NTSC broadcasts) to allow complete recording.
| ENGAGE AUTO SP/LP | |||
1 | TIMER |
| ||
Press AUTO SP/LP TIMER on the recorder front panel. | ||||
The AUTO SP/LP TIMER indicator lights “orange”. | ||||
For Example . . . |
| |||
| Recording a | |||
| length onto a |
| ||
| Approximately 150 minutes | Approximately 60 minutes | ||
|
|
|
|
|
|
| SP mode |
| LP mode |
|
|
|
|
|
Total 210 minutes
Make sure you press AUTO SP/LP TIMER before performing timer programming.
NOTES:
●The Auto SP/LP Timer feature is not available during ITR (Instant Timer Recording), and the feature will not work properly with any tapes longer than
●Even if, in step 1, you press AUTO SP/LP TIMER and it lights “orange”, that doesn’t mean that the recorder will automati- cally change from SP to LP mode during the course of the recording. Watch the tape later to confirm.
●If you have programmed the recorder to
●There may be some noise at the point on the tape where the recorder switches from SP to LP (or EP) mode.
1
ACCESS TIMER PROGRAM- MING SCREEN
Perform steps 1 and 2 of Timer Programming to call up the Timer Programming screen.
●If the recorder is in the Timer mode, first press TIMER to exit the mode.