18
EN
EDITING
Edit To Or
From Another
Video
Recorder
1 2 3
4 | 5 | 6 |
7 8 9
0
TV PROG.
You can use your video recorder as the source player or the recording deck.
MAKE CONNECTIONS
1 Connect the player’s AUDIO/VIDEO OUT connector to the recorder’s AUDIO/VIDEO IN connector.
SET RECORDING DECK’S INPUT MODE
2 Set to AUX. With this video recorder, press NUMBER Key "0" or TV PROG.."AU" will appear instead of a channel number.
START SOURCE PLAYER
3 Engage its Play mode.
START RECORDING DECK
4 Engage its Record mode.
NOTES:
●All necessary cables can be obtained from your dealer.
●NTSC tapes being played back in the NTSC [PAL mode (☞ p. 21) cannot be dubbed to another recorder.
●When you dub an NTSC tape using your recorder as the playback deck, select NTSC 3.58 (or NTSC 4.43) with the COLOUR SYSTEM button. (☞ p. 20)
IMPORTANT:
● To edit, both the player and the recorder must be of the same colour system. Press your recorder's COLOUR SYSTEM button to select the appropriate colour system.
● For more information on
TV Receiver | Player | Your recorder | Recorder | Your recorder | TV Receiver | |
VIDEO |
| AV Cable (not |
| AV Cable |
| VIDEO |
|
| (not provided) |
| |||
CHANNEL |
| provided) |
|
| CHAN- | |
|
|
|
| |||
RF Cable (provided) |
|
|
| RF Cable | NEL | |
|
|
| (provided) |
| ||
|
|
|
|
|
| |
|
| Another recorder | Another recorder |
|
| |
| Recorder |
| Player |
|
|
|