JVC HR-J231SA ShowView Timer Programming, Access Showview, Enter Showview, Check Input Data

18TIMERRECORDING(cont.)

ShowView

Timer

Programming

Before performing ShowView timer recording, be sure to read "ShowView Setup" (☞ pg. 16).

2 2

q 5/8 6

PROG.		DAILY2
	1		3	WEEKLY
NUMBER	4	5	6
ADD	7	8	9

SP/LP 0 TIMER

CANCEL OK

To Delay The Stop Time . . .

. . . press ADD after pressing OK in step 3. Each time you press, the Stop time is delayed by 5 minutes (meaning that 5 minutes of recording time is added). You can easily compensate for anticipated programme schedule delays this way.

To Timer-Record Weekly Or Daily Serials . . .

. . . after pressing OK in step 3, press WEEKLY (NUMBER key “9”) for weekly serials or DAILY (NUMBER key “8”) for daily serials (Monday–Friday).

Before performing the following steps:

●Insert a cassette with the safety tab in place. The recorder will come on automatically.

●Turn on the TV and select the VIDEO channel (or AV mode).

	ACCESS SHOWVIEW
1	SCREEN
	Press PROG.
			SHOWVIEW
		[0–9] =
		[PROG./CLOCK] :MENU
	ENTER SHOWVIEW
2	NUMBER
	Press the appropriate
	NUMBER keys to enter the		SHOWVIEW
	ShowView number.
		1 2 3 4 5 6 7 8

●If you made a mistake, press CANCEL and enter

the correct ShowView	[0–9] =
number.

	CHECK INPUT DATA
	Press OK. The ShowView
	Programming screen	SHOWVIEW	– P 1 –
3 appears.			12345678
		START	STOP
		1:23	= 22:59
	● If the ShowView number
		WEEKLY	SP
	you entered is incorrect,
		DATE	TV PROG.
	"ERROR" will be
		25. 12	29
	displayed on the screen.	:OK
	Press CANCEL and enter
	the correct ShowView
	number.
	SET TAPE SPEED
4 Press SP/LP.
	RETURN TO NORMAL
5	SCREEN
	Press OK.

●Repeat steps 1–5for each additional programmes.

ENGAGE TIMER MODE

6 Press TIMER.